RE: DIY: HOW TO Install Hood Pins $13.00... UPDATED!!!
Login  | |
|
|
|
|
|
RE: DIY: HOW TO Install Hood Pins $13.00... UPDATED!!! - 12/14/2007 6:05:57 PM
|
|
|
rmssch89
Posts: 278
Joined: 6/20/2007
From: Prescott, AZ
Status: offline
|
I just installed them myself and I only had one issue with the writeup. Even with the pins holding two or three threads on the bottom they were still not high enough for the pins to clear the hood. I ended up cutting two holes to insert the nut through that end up covered by the radiator cover, put the bottom nut inside the radiator support, and tightened it down that way. Other than that everything worked out just fine, great writeup.
< Message edited by rmssch89 -- 12/14/2007 8:02:59 PM >
_____________________________
Black 2007 GT, JLT CAI, Bama 93 race tune, MAC axlebacks, Fitch Fuel Catalyst, Roush front fascia, CDC black billet grille, billet fuel door, black calipers, antenna delete, smoked headlights/tailights/third brake light, sequential tails, hood pins
|
|
|
|
|
|
|
RE: DIY: HOW TO Install Hood Pins $13.00... UPDATED!!! - 3/9/2008 9:39:19 PM
|
|
|
BlackStang08
Posts: 131
Joined: 12/29/2007
Status: offline
|
Just bought everything i need to put these babies in! Will post pics when im done :)
_____________________________
'07 V6 4.0L Black Beauty
|
|
|
|
|
|
|
RE: DIY: HOW TO Install Hood Pins $13.00... UPDATED!!! - 3/10/2008 10:21:19 PM
|
|
|
BlackStang08
Posts: 131
Joined: 12/29/2007
Status: offline
|
Just finished about an hour ago, unfortunately its too dark for pics. Will post tomorrow afternoon! (they came out awesome btw)
_____________________________
'07 V6 4.0L Black Beauty
|
|
|
|
|
|
|
RE: DIY: HOW TO Install Hood Pins $13.00... UPDATED!!! - 3/11/2008 6:14:26 AM
|
|
|
Blk06 Droptop
Posts: 64
Joined: 10/31/2006
From: Raleigh, N.C.
Status: offline
|
Great Job !!
_____________________________
2006 GT Premium Convertible
Black w/ black int auto
corsa axleback, brenspeed 93 tune, c&l intake, FRPP 3.73, black foose nitrous wheels,staggered bfg kdw2,Roush hood scoop/front fascia/rear spoiler, painted side mirrors, cervinis grill.
|
|
|
|
|
|
|
RE: DIY: HOW TO Install Hood Pins $13.00... UPDATED!!! - 3/11/2008 8:35:43 PM
|
|
|
BlackStang08
Posts: 131
Joined: 12/29/2007
Status: offline
|
Update: put on the lanyards (they look amazing) and i fixed the little depression in the hood just by taking the metal plates off, cleaning the screw holes up with a dremel slightly wider than 1/8, then replacing the metal plates and screws.
_____________________________
'07 V6 4.0L Black Beauty
|
|
|
|
|
|
|
RE: DIY: HOW TO Install Hood Pins $13.00... UPDATED!!! - 4/18/2008 3:31:23 PM
|
|
|
rmssch89
Posts: 278
Joined: 6/20/2007
From: Prescott, AZ
Status: offline
|
For anyone interested. I never really cared for the look of the screws that came with the hood pin kit so I decided to replace them with 1/8" stainless steel short rivets. The look is really clean and they have a lesser chance of coming loose. Of course you will need to accept that they are a more permanent solution and can't be removed as easily.
_____________________________
Black 2007 GT, JLT CAI, Bama 93 race tune, MAC axlebacks, Fitch Fuel Catalyst, Roush front fascia, CDC black billet grille, billet fuel door, black calipers, antenna delete, smoked headlights/tailights/third brake light, sequential tails, hood pins
|
|
|
|
|
Printable Version
(left pin) 
