I bought a Afco Pro Series Heat Exchanger last week and it just showed up and was able to put it ondo yall think it will gain torqe and a little horsepower??
__________________
2003 Satin Silver Cobra with a 2.2L Kennebell at 20 psi and a 100 wet shot
Sponsored Links
This ad is not displayed to registered members. Register your free account today and become a member on Mustang Forums!
Not so much that it'll free up on any HP, but it'll help you maintain the power you feel before the engine is heat soaked.
+1. It'll lower your Inlet Air Temps so your engine isbreathing in cooler air to make power with.
__________________
'04 Cobra
Too many mods to list..
Stage IV Port, etc.
473RWHP/467RWTQ (Old Numbers)
New Numbers Coming Soon
Tuned by Shaun @ Advanced Engine Development
Not so much that it'll free up on any HP, but it'll help you maintain the power you feel before the engine is heat soaked.
+1. It'll lower your Inlet Air Temps so your engine isbreathing in cooler air to make power with.
Yes indeed! The cooler temps will help him maintain more consistent peak power. That IMO is just as important as trying to make an extra 5hp (which won't do much good if heat robs what you gain). So an aftermarket HE is a great move IMO!!
__________________
2003 DSG Cobra (504rwhp) - Sold
03 Cobra
