Been trying to find and read casting numbers to see if I really have the engine I thought I did but they don't make sence to me, I know what they should look like, here is what I have found.....
Posts: 6878
Joined: 12/19/2006 From: Citrus County, FL Status: offline
well what engine did you think you had? i can tell right off from that second pic its a 60 deg. V6 (2.8)
the number on the intake is the intake casting number, im not sure which number that is on the front - but your block (engine) casting number should be down on the side of the block somewhere. im not exactly sure of the location on the 2.8's
Posts: 6878
Joined: 12/19/2006 From: Citrus County, FL Status: offline
no problem. FYI offenhouser makes a 4bbl intake for that motor, would be nice with a little holley 390 4bbl on there. better gas milage if your driving easy and more balls when you romp on it
< Message edited by my77stang -- 8/24/2007 4:34:27 PM >
Posts: 6878
Joined: 12/19/2006 From: Citrus County, FL Status: offline
FYI, they are a pain in the ass to find cause nobody carries offy stuff and thats an oddball piece, but racerwalsh carries 2.8 goodies - so thats your first stop most likely. come to think of it, P.A.W. carries them too, but you have to have a catalog which is like 10 bucks to be able to find it there (their website fails, but the catalog is thick like a city phone book so its worth it).
Printable Version
Casting Number help... - 
