35thAnni99GT

I recently just bought a 94 GT with the intentions of supercharging my 4.6 and keeping the 5.0 as a daily driver. I would like to put the T-45R into my 99GT and I was wondering if the T-45 out of my 99 would bolt right up to my 5.0. I've used the search function and I haven't been able to find anything. Any help would be appreciated. Thanks again.

__________________

Responsible for 38.6+1% of the complaints in OT

Kick_Ass2k1

If the bell housing on your 94 can be unbolted, then yes, you can buy a bellhousing that will mate to the 4.6 and use the T45. I know the fox body T5's had a unboltable bellhousing, and the 4.6's had a single piece unchangable so that 5.0 owners cant use a factory T5 from a 4.6 car.

__________________
88 LX 5.0 Auto (daily driver) (BBK progreeive rate springs, KYB shocks'struts, MAF conversion)

88GT 5spd (alum driveshaft, 3.55's, cobra clutch, steeda tri-ax, bbk full exhaust, bbk cold air, MSD 6AL)

87GT t-top 5spd (R.I.P.)

ahittz24

The fox T5 does have a removable bell housing (why you would want the turd in anything else god only knows)

__________________

35thAnni99GT

d no, no, no.... I was wondering if I could throw the factory T-45 from my 99 4.6 GT into a 94 5.0 GT. From what I can gather, then, if I can get a bellhousing that with bolt up to the5.0 then I can put a T-45 in there?

__________________

Responsible for 38.6+1% of the complaints in OT

mattdel

t45 bellhousing is part of the tranny mold, won't work

__________________
http://www.prizerebel.com/index.php?r=613718

35thAnni99GT

well, boo.... thanks for the help then anyways guys... guess I'm going to need to find a used T-5 from somewhere then. The whole reason I wanted to put a T-45 in was because the T-5 that came in the 5.0 is shot.

__________________

Responsible for 38.6+1% of the complaints in OT