RE: Steeda shifter bushings
I had them installed at the same time I was using the Saleen short shift block. In combination with the Saleen shifter, they seemed to have smoothed the shift out a bit, but nothing major in my opinion. I installed them with the stock shifter still installed, but it would undoubtedly be much easier with the shifter pulled out. The back bushing is easy enough, but the front, while installed, was a pain.
Mike
__________________
2005 Mineral Grey GT,(1 of 2128 - 12/15/04)...HIS
2008 Highland Green Bullitt (Prod. # 0115).....HERS
ON SEPTEMBER 15TH, 2008, NATE SAID....
congrats brother! skip the Hurst and go straight to MGW, save you the hassle later 
|
