My question is simple......Will I need any adjustment to my 07` Mustang GT after installlingEibach Pro Kitlowering springs? And is there any link with instructions on removing and installing springs?

You will need some kind of camber adjustment product after lowering with the Eibach springs. Your camber will be slightly negative after lowering the car.

There are 3 types of products that can work:

1. Camber Adjustment Bolts (http://www.stangsuspension.com/store/comersus_viewitem.asp?idproduct=1052)
2. Camber Plates / Strut Mounts (http://www.stangsuspension.com/store/comersus_viewitem.asp?idproduct=1374)
3. Caster & Camber Plates - Made by Maximum Motorsports (http://www.stangsuspension.com/store/comersus_viewitem.asp?idproduct=1438)

They are each progressively more expensive but each offer a few more features.

If you want a cheap & dirty camber adjustment... the Camber Bolts will work...

Sincerely,

I'm thinking about doing the same thing. These are pretty cheap too. About how much do places normally charge to install them?

http://www.stangsuspension.com/store/comersus_viewitem.asp?idproduct=472

ORIGINAL: 07toplessGT

I'm thinking about doing the same thing. These are pretty cheap too. About how much do places normally charge to install them?

http://www.stangsuspension.com/store/comersus_viewitem.asp?idproduct=472


It usually takes about 2-3 labor hours for installation. Most places charge between $60-100 per hour. So, expect to pay between $120-$300

Sincerely,