I have a t60-1 that I may sell. I am trying to go with something bigger. The turbo has less than 2000 miles on it. But looks brand new. Info on the turbo, it is a 60-1 compressor and non-hifi. It has a p-trim wheel and ceramic ball bearing. The exhaust side is a .96 AR and is an on center housing. And it is oil and water center section. It also has a 4" inlet. Here are some pictures of the turbo as it is on my car right now. The spool up is quite good for a .96 AR. I make full boost, which is 13lbs at 4100rpm and it pulls hard as **** to 7000rpm, which is my set redline. I made 374whp on 13psi. Please im me with further questions or offers. Thank you. :thumbup:
FS - Turbonetics T60-1 non hifi with .96AR and Ceramic Ball Bearing - turbo / turbocharger
