I went to HED the other day and got my car dynoed. It made 465rwhp and 500rwtq and my mods are 2.8 upper, CAI, magnaflow catback with gutted stock h-pipe and predator tuned by RWTD and I ported my own blower and TB so what do you think is that pretty good numbers for it around 90 degrees.
__________________
2003 Satin Silver Cobra with a 2.2L Kennebell at 20 psi and a 100 wet shot
Sponsored Links
This ad is not displayed to registered members. Register your free account today and become a member on Mustang Forums!
Those numbers aredecent. I had comparable mods on my 03 Cobra and made 500rwhp 486 torque tuned by RWTD. As far as Z06AINT**** goes, have you even raced one? With only 465rwhp and a 3800lb cobra you will get owned by a Z....
__________________
03 Cobra-SOLD!
Tuned by RWTD 500rwhp 486 torque
New Ride:
03 Z06 Corvette
Lunati 24/24 LSA 112 Cam
Ported Heads
Long tube Headers
Breathless Ram Air
U/D Pulley
Tuned by Aaron Scott@South GA Corvette
442rwhp 402 torque
3000lb. Car
Yes I have Raced a Z06 It was C6 and I put about three cars on him. I am working on my wet shot as we speak so this coming up weekend Its going to be a C6 z06 next
__________________
2003 Satin Silver Cobra with a 2.2L Kennebell at 20 psi and a 100 wet shot
Ive raced lots of Z06's. The best one was one with a g5x4 cam(look up the specs if you can find them they are nuttsss) And trick flow heads all the stuff that goes along with that setup making around 480 at the wheels and we did a freeway race all the way to 150 and i walked him slowly but i still walked him. And 480 is around 40 hp more than the new C6 Z06's run... So Z06's are done... And good for you ZO6AINT****those are good numbers it all depends on how the shop tunes it...
__________________
03 cobra vert
622 rwhp 614 rwtq new numbers 18lbs of boost. 2.3whipple gen 2. Ported heads, ford gt cams, Lt's, all other supporting mods.
Your screen name is funny. I hope none of the Z06 owners in the Street Kill section see it.. [:@]... Lol. [8D]
But your numbers seem where they should be,despite having a home-made ported blower and TB. I wouldn't expect high gains from that at all (assuming you're not a machinist or have porting experience). And you'd definitely dyno a little higher in cooler weather.
__________________
'04 Cobra
Too many mods to list..
Stage IV Port, etc.
473RWHP/467RWTQ (Old Numbers)
New Numbers Coming Soon
Tuned by Shaun @ Advanced Engine Development
Yes I have Raced a Z06 It was C6 and I put about three cars on him. I am working on my wet shot as we speak so this coming up weekend Its going to be a C6 z06 next
A C6 Z06 has 505hp...1/4 11.6.....I don';t believe you
Who put down an 11.6 in the quarter in the new zo6? Road and track put down 11.8 and they are ammmmmaaaazzzing drivers. And mabe it was a c5 Z06 and just a normal C6. That would be a pretty good race c5 Z06 vs. C6(not z06)? And ive raced the new C6 Z06 it was a short run with my old tune and he had exhaust from like 40- 85 mph but it was real close. The new Z06's only put 440-450hp at the wheels(in the aspect they put 505 at the flywheel) also the c6 z06 has 470 flywheel tq which is way down from the cobras tq. Not saying that the cobra would win but it would be a closer race than you would think.
__________________
03 cobra vert
622 rwhp 614 rwtq new numbers 18lbs of boost. 2.3whipple gen 2. Ported heads, ford gt cams, Lt's, all other supporting mods.
yeah thats much better.... stop magazine racing... they're not "amazing drivers" they suck actually more instances then not...
There was actually a guy that got into the 10s on a stock C6 Z06, with drags... The z06 might be close race (if he were stock) but he wouldn't have put 3 cars on it....
New Dyno Numbers
