moosestang

I'm really looking for people who installed their own. Did you have any trouble modifying the coolant crossover tube?I readsomeone broke theirs trying to remove the inner tube.My other question is how hard would it be to get the car back to driveable condition if you had to remove the supercharger for service/repair. I'm not totally sure why the crossover tube is modified, would you need to put all the coolant lines back to stock to run without the blower? I'm trying to think of worse case scenarios. I'm getting ready to order the vortech kit from brenspeed. I should be installing it on Sept 09.

By other question has to do with oil getting sucked into the intake. Is this a problem with the vortech kit?

__________________

whipple HO SC,FRPP springs, Pypes mid mufflers, Che adj. LCA, hurst, 4.10's, 1 piece DS, spec stg 2 clutch. Accel coils 12.52@117.6mph so far with a 2.01 60 ft time(pre shaft, coils, clutch).

Downshifting Crew Member

Stkjock

I cant venture any help on the modifications....however since its a 13-15 hour job to install and you have to tap the oil pan and remove the stock coolant tank, relocate the alternator and a few other items.... IMO its not practical to remove for warranty work.(my assumption for why u asked)

you'd need at least a day to remove and then a second day to reinstall.....

__________________
Tngstn 06GT-5 spd -Vortech HO S/C-Tuned by Realspeed Auto

You can never have too much power, just not enough traction.
12.05 @ 115.7 - 1.69 60'

moosestang

I was talking about warranty work on the supercharger or even repairing it out of warranty. I don't remembering reading about relocating the alternator in the paxton instructions. I haven't found the vortech instructions online, if anyone knows where they are please shoot me a link.

__________________

whipple HO SC,FRPP springs, Pypes mid mufflers, Che adj. LCA, hurst, 4.10's, 1 piece DS, spec stg 2 clutch. Accel coils 12.52@117.6mph so far with a 2.01 60 ft time(pre shaft, coils, clutch).

Downshifting Crew Member

Stkjock

ahh.... you werent specific the way it was worded...

I was working from memory about the alternator.... .I maybe off in my recolection....

google is your friend.... http://www.vortechsuperchargers.com/pdf/manuals/4FU218im.pdf

pg 19

__________________
Tngstn 06GT-5 spd -Vortech HO S/C-Tuned by Realspeed Auto

You can never have too much power, just not enough traction.
12.05 @ 115.7 - 1.69 60'

moosestang

You know I looked on the vortech site and had a hell of a time navigating. Looks just like the paxton install.

The part about heating the coolant crossover tube is all I'm worried about and then it says to insert the plug and use sealer. What sealer, i don't know. I'll ask brent at brenspeed what they use to heat it and what sealer they use.

Vortech going on Sept. 9th unless I change my mind before then.

__________________

whipple HO SC,FRPP springs, Pypes mid mufflers, Che adj. LCA, hurst, 4.10's, 1 piece DS, spec stg 2 clutch. Accel coils 12.52@117.6mph so far with a 2.01 60 ft time(pre shaft, coils, clutch).

Downshifting Crew Member

06GT4RAD

Change your mind before it's to late. Go with the Saleen. I currently have a Procharger on my F-150 and if i could do it over again I would not get a Centrifugal Supercharger.

And screw that tapping into your oil pan crap.

Richard

__________________

2006 GT-Borla Stingers, Eibach Pro Kit, Tokico D-Specs, MGW Billet, 20" Foose Nitrous w/BFG KDW Tires, CHE panhard bar & Support

http://www.ca-mustangs.com/home.php

moosestang

Frankly, i was turned off by the saleen due to all the problems with dropping the transmission. I don't need all the hassle. Plus I allready have 4.10 gears, i don't need anymore torque down low on the street.

Beside the hassle of putting a hole in the pan for the return line, it makes more sense to use filtered engine oil don't you think?

I also want it to be quiet, not sure the saleen can deliver that.

Did you ever have leaking problems with your procharger? I've read their earlier models had leaking problems. I'm assuming your procharger was a self contained unit.

__________________

whipple HO SC,FRPP springs, Pypes mid mufflers, Che adj. LCA, hurst, 4.10's, 1 piece DS, spec stg 2 clutch. Accel coils 12.52@117.6mph so far with a 2.01 60 ft time(pre shaft, coils, clutch).

Downshifting Crew Member

moosestang

By the way, thanks a lot for putting me in doubt again. I'm no asking brent about the saleen stage 1 package, should be $5300 minus the tuner. $1300 ain't much when i'm allready dropping $4k.

Anyone want to start a centri vs. twin screw debate? Which will give less problems/last longer? Which do you think is easier to install? Looks like the saleen is easier to me, i asked brent his opinion, but judging by the $650/one day install price, i'm guessing the saleen.

__________________

whipple HO SC,FRPP springs, Pypes mid mufflers, Che adj. LCA, hurst, 4.10's, 1 piece DS, spec stg 2 clutch. Accel coils 12.52@117.6mph so far with a 2.01 60 ft time(pre shaft, coils, clutch).

Downshifting Crew Member

hammeron

well moose, since it was YOU who opened the door

PLEASE PLEASE go with the whipple non intercooled,
I BEG YOU!


i only want the best for your stang, cause i know how much you
love her.....

__________________
2006 GT Supercharged



Whipple Crew

moosestang

I don't think brenspeed has a tune for the whipple. I've read plenty that the whipple tune sucks! I don't really like the look of the whipple or the KB to tell you the truth. The saleen looks the best in the engine compartment, but looks aren't everything.

__________________

whipple HO SC,FRPP springs, Pypes mid mufflers, Che adj. LCA, hurst, 4.10's, 1 piece DS, spec stg 2 clutch. Accel coils 12.52@117.6mph so far with a 2.01 60 ft time(pre shaft, coils, clutch).

Downshifting Crew Member