wraaaa

I'm replacing my stock headunit on my 2001 v6 with a carPC that I'm in the process of building. If you're interested, I'm pretty much modelling my PC after this install. Same screen, same placement, similar hardware.

Since I will need to buy a small amp to power the tweeters because I'm removing the headunit which powers them, I have decided I might ditch the 2 amps that power the 4 mids too. Will this Profile AP1040 be better than the Mach 460 amps for the stock speakers? Will it be able to power all 8 speakers (the 4 mid speakers and the 4 tweeters), or will I still need to install more than 1 amp to power everything?

ttocs

the stock speaker do not work well with aftermarket amps....... If you are going to pull one or the other you will end up pulling both. The stock speakers are not work keeping to be honest...

__________________
http://www.cardomain.com/ride/2395420