M112 kit for sale

johnt2k7 · 07-23-2007, 09:43 PM

Seagel 1000 over on boosted is getting rid of his car and is selling his m112 project seprate from car for 1400 + shipping

it has

2003 Cobra Supercharger (with 6k on the blower) with 2.93 Metco Pulley and Stocker pulley (3.65)
Throttle Body
03/04 Cobra TPS Sensor
Throttle Body bracket
Plenum
Idlers
All 8 Injectors (39lbs blue) (only 4k miles on them)
Focus Fuel Pump
MAF with Stock intake system down to the paper filter and K&N filter(4k miles on them)
JLT Ram Air Intake (Brand spanking New)
Custom 3" high, upper plate for the Supercharger to the V6 manifold
Autometer Guages (Vac/Boost,A/F Ratio,Water Temp) with Dual Guage Pod and Single Steering Column Pod
Xcal-2 Tuner

All bolts for the supercharger and the Supercharger oil and Gaskets for everything on the supercharger is included. (120 dollar value)

Pretty much all the Performance stuff has under 6K miles.

its a great deal i think but i dont have 1400 to spend right now and cant afford it i posted pic a while back about the way he built it its diff then the one lil roush has you dont have to mod the fuel rails because the side walls on the upper are slanted and the FR's run along the slant and the m112 is on top

johnt2k7 · 07-23-2007, 09:46 PM

**** i forgot the link here you go

http://www.boostedmustangforums.com/...read.php?t=723

HornyHornyHippo · 07-23-2007, 09:48 PM

hmmmmmmmmmmmmm. Procharger or this. 4.500 or 1.600, this is hard.

johnt2k7 · 07-23-2007, 09:56 PM

here is the link to his project thread
http://www.boostedmustangforums.com/...read.php?t=593

and here is a link to 2 thread with some pics of his manifold and of the manifold on the car with the blower u just have to scroll down the page and look for the posts by SEAGEL1000 and those are his
http://www.miniterminatorsforum.com/...578&page=2
http://www.miniterminatorsforum.com/...578&page=3

and here are some more pics

LilRoush · 07-24-2007, 06:45 PM

This is one of the better set ups out there right now. I worked with him a lot to get this laid out and put together. It will put down some impressive number for minimal cost.

johnt2k7 · 07-24-2007, 08:04 PM

i want a m112 on my car and this kit has everything needed pretty much and its a reasonable price but unfortionately i dont have eneough money right now

Top Gear · 07-24-2007, 08:17 PM

That won't fit on our cars with out cutting a hole in our hood?

johnt2k7 · 07-24-2007, 09:01 PM

it wont fit under a stock hood u either need to get a gt scoop and cut out the bottom of the gt scoop or get a cowl or do like he was doing and get a old mach 1 hood and then get the cut out for the shaker filled back in with sheet metal or fiber glass like this and the blower will then be able to fit under neith with no problems

winner99 · 07-24-2007, 09:13 PM

how much psi exactly?I think id rather wait for justins 17psi tt kit to go on sale. Thats a nice deal.

johnt2k7 · 07-24-2007, 09:25 PM

17psi TT u better go ahead and get forged internals now because ul need it before that

with this kit you can run a wide range of PSI depending on what pulleys you use