So, while buying some Sonoco 100 octane gas a SRT4 pulls in and from the front I was like hey nice, Bluebeast would love this! It has halo type fog lights and HID headlights but then I see the side of it and the big friggin wing and it's obviously a poser Fast and Furious wannabee. He goes to open the door and yup, lambo doors and first thing the guy tells me is it's his customers car and he just build it up to 430 fwhp. Aside from the monster twin5 inch exhaust in the middle of the bumper it sounded pretty tame so I have no idea if his claim was accurate or not. The interior was blinged to the max, brightly glowing gauges lined the pillar, the inside was just glowing bright blue and the sides of the car had a silver decal or paint scheme that I couldn't make out in the dark. We didn't run but it was just strange enough to post about.
Later on I saw the car at Strats which was packed, if I was his customer and found out he was out cruising in my ride I'd be pissed. Maybe JD saw it if he was there last night, we'll see if he chimes in.
Next up, after leaving and dropping off a buddy I was heading South on Randall in Lake in the Hills I pull up to a red light at Rt. 62.A new GT with 3 tiny high school girls in the car giggling (I think girls at that age just giggle, all the time, evey time I see one they are giggling when around other high school girls, just an observation) I digress, she takes it out of gear and throws 3 revs at me right before the light turns green, I was shocked enough by this that I just sat there when it turned green which was when she put it to the floor! I was thinking cool! Chicks in a new GT and they like to race! Oh wait, how about if you race too moron?
I was about a second off of her launch and nailed it and smoked by her (it was obviously bone stock)and I get the next red light in frontof Jacobs High School, she pulls into the right turn lane and they wav! I was sitting there still stunned they raced I sat there looking stupid and just grinned, ack. Not that I was going to hit on teeny boppers but at least wav, the arm won't move so, just looking stupid, they go by and I manage a thumbs up that they never see.
Where the frig were these type ofgirls when I was that age about 100 years ago?
__________________
Vortech V2-SQ Supercharger
60' 1.769
1/8 7.901@90.15
1/4 12.20@113.50 - new best! 10/13/07
Best 1/4 on stock KDWS tires = 12.56@113.3
My 2006 Mustang GT Web Page
Sponsored Links
This ad is not displayed to registered members. Register your free account today and become a member on Mustang Forums!
RE: Friday night kill and a Fast and Furious clone
Quote:
ORIGINAL: doodad
good story!. looks like you hunt every friday/saturdays dude. Damn street racer
There were a bunch of Cobra's from Chicago SVT going to GLD last night, I got stuck at work (AAARGGGGHHHHH!!!!!!!!!!!!!) Because of my hours I have some Friday and Saturday's to kill, literally. So, I have two routes that I know will have action and stay with it.
I went to Strats as well and it was packed to the rim but I can't stop there for some reason, maybe because I'm almost 20 years older than the average there the times I have gotten out of the car the bullsh!t was so deep I just saw no reason to stay. So I cruise and pray for no cops which means the odds are against me and I'll get nailed sooner or later.
Last night I got on it once, just 1st and 2nd and thankfully only a little into 2nd and sure enough a cop was going the opposite way and was slowing down and I thought going to turn around but instead he hit the gas again and took off. Pure luck, he probably saw me, saw I'm an old geezer now and let me go, who knows but I need to reel it in a bit, I don't race in traffic but the races seem to find me now so I need to go back to letting the other car go and stick to cars that can give me a run.
__________________
Vortech V2-SQ Supercharger
60' 1.769
1/8 7.901@90.15
1/4 12.20@113.50 - new best! 10/13/07
Best 1/4 on stock KDWS tires = 12.56@113.3
My 2006 Mustang GT Web Page
RE: Friday night kill and a Fast and Furious clone
ya'll wanna go to Byron tomorrow?
if so Let me know ASAP cuz a KB 06 GT, 95 GT H/C/I vortech blown and a torch red cobra bolts on will be there and sure i am going with them too!
RE: Friday night kill and a Fast and Furious clone
Quote:
ORIGINAL: doodad
ya'll wanna go to Byron tomorrow?
if so Let me know ASAP cuz a KB 06 GT, 95 GT H/C/I vortech blown and a torch red cobra bolts on will be there and sure i am going with them too!
Gonna be working on a leak in my spare bathroom plus in the 80's means hot track temps, winds are favorable though.. hmmmmmmmmm got me thinking bud, kinda warm, I know what my car runs in the heat BUT still sounds good to me.... hmmmmmmmmm
__________________
Vortech V2-SQ Supercharger
60' 1.769
1/8 7.901@90.15
1/4 12.20@113.50 - new best! 10/13/07
Best 1/4 on stock KDWS tires = 12.56@113.3
My 2006 Mustang GT Web Page
RE: Friday night kill and a Fast and Furious clone
Quote:
ORIGINAL: viking396
Quote:
ORIGINAL: doodad
ya'll wanna go to Byron tomorrow?
if so Let me know ASAP cuz a KB 06 GT, 95 GT H/C/I vortech blown and a torch red cobra bolts on will be there and sure i am going with them too!
Gonna be working on a leak in my spare bathroom plus in the 80's means hot track temps, winds are favorable though.. hmmmmmmmmm got me thinking bud, kinda warm, I know what my car runs in the heat BUT still sounds good to me.... hmmmmmmmmm
well it is gonnna be high 60s low 70s in the morning and then it will get hot. if you wanna give a shot. at 7.30am in the morning i will meet KB 06 GT (472rwhp), and take off to my buddy's house and then to Byron.
RE: Friday night kill and a Fast and Furious clone
I was dropping off a customer car yesterday and there were 3 horny FIDM chicks there posing in beautifully lude positions on my buddy's GT for a spur-of-the-moment photo shoot...but I obviously didn't have my car for them to hump as well. I felt like I missed an opportunity.
__________________
05 gt:
345/335 --> 427/471 with the flick of a switch
PR Manager for Automotive Dezignz
MECP Installer and Mobile Product Specialist
Mechanical/Manufacturing Engineer.