Do they do a lot to help fix wheel hop? Should I get both upper and lower? Will they fix my 60ft times and if so by how much? How much is installation for them?

Thanx ahead of time!

Hey Steel!
I got the upper&lower steeda arms. It stop my wheel hop, I can't answer your other question, because I have never ran my car at the track.

He's a shot of my LCA




local://upfiles/47981/39D7268B9E6C46DC92012DC15BF7E798.jpg

Thanx, How much did they cost? Do u think they were worth the price?

I got them from blow-by-racing 325.00 for upper&lower.
They will still be worth it, if the price was 400.00!

Try this link!
http://www.blowbyracing.com/uplocoarmpa.html

Thanx a lot definitly gonna check um out. Do u think they would fix my wheel hop after I get gears and a tuner?

Thanx ahead

how are the installations for the UCA and LCA's

ORIGINAL: SteelStang05

Thanx a lot definitly gonna check um out. Do u think they would fix my wheel hop after I get gears and a tuner?

Thanx ahead


Yes! IT WILL FIX YOUR WHEEL HOP.
And your CAI is call Airaid, not AirRaid

Check u later!
Denny

ORIGINAL: hataap

how are the installations for the UCA and LCA's


My LCA install was easy. Used jack stands to raise the car and keep it at ride-height, removed rear wheels and parking brake cables (snap in & out), then direct swap out of LCA's (one at a time). Two bolts for each LCA, torqued to 130 ft.lbs.

Denny u install them urself, how much would it cost for a shop to install them? I just ordered a set of the steeda's for mine!:D

I took my car to mustang magic on Long Island, NY. They put the headers on at the same time they did the control amrs. Here's there number 1-631-254-3430 ask for Joe, he's the owner. Check you later, Denny

ORIGINAL: Black GT

ORIGINAL: hataap

how are the installations for the UCA and LCA's


My LCA install was easy. Used jack stands to raise the car and keep it at ride-height, removed rear wheels and parking brake cables (snap in & out), then direct swap out of LCA's (one at a time). Two bolts for each LCA, torqued to 130 ft.lbs.



cool thanks.

How much would it cost me at there Denny? what part of LI is this shop? Probably gonna go to meineke anyway, Dad knows a guy that works on his 72 charger or the local mobil guy thats works on all my families other cars, cuttin me a deal either way!:DWhat part of LI r u from?
TY[sm=groupwave.gif]
PS-How much was the Aluminum Driveshaft? Install info/prices/time? Did u see any gains from it? What ur estimated gainsfrom it?

just save yourself the shop time and cost and do it yourself. basic hand tools, and an easy install.

No, I'm getting gear, t-lok and sub frame connectors installed too so while their back there, they might as well put these in too.