351W specifications help

Mustang Forums Mustang Classifieds Photo Gallery Calendars Search Live Chat Contact MF Sponsors
Mustang Recalls Mustang TSB's News Timeslips Timeline Wallpaper Member List Register Login

351W specifications help

Printable Version

Mustang Forum >> Ford Mustang Tech >> General Tech >> 351W specifications help

Page: [1]

Mustang Forums Sponsor

General Tech Forum Sponsored by Edelbrock

Login
Message << Older Topic Newer Topic >>

351W specifications help - 1/12/2005 5:42:46 PM

saleen351mike

Posts: 40
Joined: 9/26/2003
From: United States
Status: offline what is the Cylinder Bore Size and The Piston Stroke Length of an unmodified 351w block?

also, can someone discribe in as much detail as possible the Combustion Chamber Volume and the Piston Deck Clearence.

any info will greatly help in doing calculations.

thanks alot guys

mike

Post #: 1

RE: 351W specifications help - 1/12/2005 6:23:55 PM

C/Note

Posts: 1911
Joined: 11/16/2004
Status: offline

quote:

ORIGINAL: saleen351mike

what is the Cylinder Bore Size and The Piston Stroke Length of an unmodified 351w block?

also, can someone discribe in as much detail as possible the Combustion Chamber Volume and the Piston Deck Clearence.

any info will greatly help in doing calculations.

thanks alot guys

mike

4.00 bore 3.50 stroke,,,,,=351.....heads depends on which head you going with???stock late model heads around 68cc..some heads or 60 cc like the edel rpm or victor jrs ,,,a 351w with a flat top with 60cc head compression is 10.7 to 1...deck height is 9.500,,,heres a pic

Thumbnail Image

Attachment (1)

< Message edited by hotrodmanII -- 1/12/2005 6:25:06 PM >

(in reply to saleen351mike)

Post #: 2

RE: 351W specifications help - 1/13/2005 5:08:19 PM

saleen351mike

Posts: 40
Joined: 9/26/2003
From: United States
Status: offline wow, thanks bro. that is what I needed.

later, mike

(in reply to saleen351mike)

Post #: 3

RE: 351W specifications help - 1/13/2005 5:16:03 PM

C/Note

Posts: 1911
Joined: 11/16/2004
Status: offline

quote:

ORIGINAL: saleen351mike

wow, thanks bro. that is what I needed.

later, mike

no problem heres my proof

Thumbnail Image

Attachment (1)

(in reply to saleen351mike)

Post #: 4

RE: 351W specifications help - 1/15/2005 12:17:11 AM

import slayer

Posts: 787
Joined: 11/18/2004
Status: offline Don't forget that some early 351w blocks had a 9.2 deck height.

_____________________________

1982 GT 351w(.060),10.7:1 flat top pistons, ported & polished heads, 1.94/1.60 valves,stealth intake, 750 holley dp, Comp 274XE cam, C-4 tranny with 3700 stall converter, 8.8 rear, 4:10's, subframes,electric fan.
Tons of mods that are too much to list

(in reply to C/Note)

Post #: 5

RE: 351W specifications help - 1/15/2005 12:50:24 PM

C/Note

Posts: 1911
Joined: 11/16/2004
Status: offline

quote:

ORIGINAL: import slayer

Don't forget that some early 351w blocks had a 9.2 deck height.

no they didnt ,,they got after market blocks with 9.500 and 9.200 deck height,,earlier ones had 9.480...check it out!

< Message edited by hotrodmanII -- 1/15/2005 12:51:21 PM >

(in reply to import slayer)

Post #: 6

Login OR Register now to post a reply to this forum topic.

Page: [1]