Hi I have a 2001 Ford Mustang Gt that I hooked up a pyle alarm up to. I bought a "Smart" Window module. It is supposed to roll both windows up and down. I am wanting to know how I should wire this thing up. Will I need any diodes or relays or anything like that? Black/white-(Cut loop for 2 window up/down mode) Green/Black=Front right motor down Green= Front right switch down Red= Fused 12v constant Blue/black= front left motor down blue=front left switch down black=ground brown/blue= front right motor up brown= front right switch up yellow= (-) up activation input yellow/white=(-) down activation input white/blue= front left motor up white=front left switch up
_____________________________
01 Mustang Gt Full HID's, custom paint, body kit, 18" saleens with nitto Invo tires.
Well I haven't got this module to work right. The only window I have gotten to go down is the passenger side and it was accidentally left unplugged. Both sides wont go up and both wont go down with the switches plugged in. The module is also getting warm and making a humming noise which cant be a good sign. Could I please have some help. I have all the wires that are supposed to be ran to the motors like 2 inches from both motors and the same goes for the switches also. Here is how I have it wired Window module Car window wires Pass side motor down- Green/black to the Red wire on motor Pass side motor up- Brown/Blue to Yellow wire on motor Pass side switch up- Brown to White/Yellow Pass side switch down- Green to Tan/Light blue Drivers motor down- Blue/Black to Yellow on motor Drivers motor up- White/blue to Red on motor Drivers switch down- Blue to Yellow Drivers switch up- White to White/black Then of course the 12v power, ground, and I cut the loop. Can someone please help me out?
_____________________________
01 Mustang Gt Full HID's, custom paint, body kit, 18" saleens with nitto Invo tires.
Printable Version
Mustang power window module help! - 
