I bought an auto meter air fuel mixture gauge this week for my mustang. I was going to install it today after I got the wiring diagrams off alldata. I am hooking up to driver side exaust manifolds first HO2s sensor. The high signal line which I need to hook it too goes to PCM which is behind the driver side kick panel. I removed the kick panel and took the wiring haresses off there bracket. The wire I was looking for was yellow with a light blue stripe. I couldn't find the wire at all though. Does anyone know which harness the wire is on? There were 4 of them I think behind the kick panel on the bracket. Maybe someone has done this before can help me out.
Also does anyone know where I can get a pod for the gauge, I have universal one but it doesn't fit right.
__________________
84 Mustang SVO
86 Mustang GT
http://www.youtube.com/86zach
you are looking in the wrong place.... you want the passenger side kick panel, unbolt the wiring harness, its huge, 130? pin connector..... i think the one you want is # 60- or 70- something, its gray with a blue stripe
__________________
03 Sonic Blue GT 5spd Straight pipes, 4.10's Densecharger, polished stock plenum, pro M mass air, Cobalt A/F ratio put where the cig lighter used to be, steeda tri-ax, 10.5" slicks, Cobra Body
Air/Fuel Mixture Gauge Help
