ive been looking up some info on the stroker kits lately and that seems to be my best bet to gain some hp without using nitrous or other poweradders (yet). ive seen the dss racing kit but havent really seen any other choices. any recommendations and how much/ what else should be done before the stroker is purchased. the car has about 136k miles on it and its a 92 lx 5.0. i will be adding h/c/i but havent decided which ones yet might go trick flow or something else
Sponsored Links
This ad is not displayed to registered members. Register your free account today and become a member on Mustang Forums!
Eagle is my fav. There's a company called ad performance who sells rotating assemblies cheap. I actually went through them for mine. They balanced it and I got my flywheel and balancer thru them. They balance cheap too, I think I paid $150 to have the assembly balanced.
__________________
Richard Dusterhoff
Technician at Ford Performance shop
ASE Master certified
dont buy a dds motor...heard way to much bad about them, more than the good. build it yourself or have a local shop build it for you.
__________________
For Sale: Edelbrock RPM 2 intake
Edelbrock RPM heads
comp XE270HR-14
comp magnum double roller
comp cams magnum 1.6 rockers
ford racing lifters
hardened Pushrods
aode,clutches,modified VB,3500 stall,28oz or stock flexplate -pm for more info
^^^ i see where your coming from with the old oiling issue and well less meat but i have friends with 347 383's with over 50k and yet to have a problem due to the displacement. But i cant say much i have a 306 for the same reason adder just said and mines a 4 bolt aftermarket block.
__________________
1988 Ford Mustang CHP Streetfighter Pro block Forged everything. ARP Bolts. TF Box-R Series intake.AFR 205 heads (o-ringed)(HD) Vortech V-1 T-Trim charger, Aeromotive fuel. PA Super Comp C4 Eaton + Superior 33 Spline axles 9.726@141
331 stroker?
.......
