its always a gamble, but alot of people will say 500 @ flywheel is about right
The internals can out-last the block if the tune is right. If your planning on making enough power to crack a stock block, look into an aftermarket block and forged rotating assembly.
HOWEVER, Its is a known problem that press fit wrist pins will begin to gall up and seize around 400-450hp. So if you want to build up in a stock block, make sure you get a rotating assembly that uses full floating pins.
__________________
Fort Sill 2008-2009
I'm gonna blow some stuff up!
I love turbos and I just would like to do it on the stock motor. From quick time turbos or something like that, they said they made 390 rwhp on stock motor at 9 or 10psi and was wondering how long the motor could last with that horsepower. I t wouldn't be ragged out, just when something fun came around to mess with. Thanks and ya'll got back quick
__________________
00 mustang sold
stock 94 gt vert 5 speed
you could freshen up the bottom end with a new set of rings and bearings, and get it balanced while its apart... ong as you have a tune, you should be ok
__________________
Fort Sill 2008-2009
I'm gonna blow some stuff up!
max power on stock internals
