ok, the poll feature didnt work before so i couldnt put on in the first post. so here it is, where should i put the tips?
EDIT: im adding another option. i kinda like this one, i do like the center exit idea but i dunno....this is pretty cool... and i know thats a bad pic, that and it looks a lot higher than it really is for some reason. all the way apart or a little bit more twards the center or perfectly centered
< Message edited by amrcnidyot -- 5/24/2007 2:29:20 AM >
i voted all the way centered. and leave about a half to a full inch of space between(so you can clean in between them of course!!) its gonna look really good man.
_____________________________
03 AB Mach 1 full bolt ons, 4:10''''s, 18''''s 13.1 at 108 with a 2.0 60'''' < should be in the 12''''s
i say all the way apart because if u put them in the middle or towards middle i think you may see some aluminized pipe running to them and then when they get some age on them it will rust and look ugly
Yeah, I like when they are either all the way to the sides or in the middle. You should have a set of those dangling balls hanging in the middle like a tow hitch, haha!
the pieces on the sides are roush rear valences. the exhaust tips are actually camaro tips...i know its ironic concidering the license plate i have. shouldnt be much wourk at all, i cut the exhasut about 2" before the tips and now all i need to do is have a bend go in around the gas tank twards the center then end at the tip where it can be welded on.
i say in the center, they all really look good to me tho, my only thing is, all flat tips like that, that i have heard had a very hollow echo to them, it sounded good but it had a kind of irratating noise to it that i didnt like, its gonna look great tho
i say in the center, they all really look good to me tho, my only thing is, all flat tips like that, that i have heard had a very hollow echo to them, it sounded good but it had a kind of irratating noise to it that i didnt like, its gonna look great tho
hmm, i didnt know that. that kinda sucks, i hope they dont sound like sh*t. i guess i could always do my little side exit idea if they do, it wont cost too much at all to do. i hope it sounds good though.
it sounds good just sumthin i have noticed, maybe u can find an ls1 with aftermarket muffs and listen to it, it was just sumthin i didnt like, its like it echo's and bounces around in that HUGE tip
it sounds good just sumthin i have noticed, maybe u can find an ls1 with aftermarket muffs and listen to it, it was just sumthin i didnt like, its like it echo's and bounces around in that HUGE tip
yea the exiting area of one of these is like 16"sq and the exiting area of like a 3.5" tip is only 12.sumthin so there is a lot more, it will be very open, im hoping since its a v6, and i still have the cats it shouldnt be too bad.
Printable Version
where do i put my exhaust - 
(And UPR Springs) 
