hey do any of you all know where i can find some detailed instructions on how to install these, i heard the one taht comes with the gauges is kinda shoddy.
thanks in advance
Sponsored Links
This ad is not displayed to registered members. Register your free account today and become a member on Mustang Forums!
its just a matter of taking out the gauge cluster and then the plastic faceplate to the cluster, taking off the screws that hold the old gauge face in and putting the new one on. The only thing you need to make sure of when you put new gauge faces on is that you put the needles on the exact same way you took them off or all your gauges will be off. Pretty easy installation i thought, it took me about 30 mins. Just take everything off and put it back together.
DO NOT TIP YOUR Gauge Assembly!! There is a warning on it somewhere if I remember right. You must keep it upright the whole time it is removed. This will screw up the gauges, possibly permanentally. I accidentally tipped mine for a few, and they were wacko for the first hour of operation thereafter. Good luck.
__________________
SShadowSSin
1995 Yellow Mustang Vert
hard to get all the needles perfect my speedo is off my 4 mph have to take the whole thing apart again just to adjust that needle. when your done use a gps to check you speed on the road dont wana get a ticket for no speeding unintensionaly
__________________
2001 GT 80mm mass air, 80mm throttle body, 1 inch throttle body spacer, 1/2 inch intake plenum rise, free flowing intake plenum, vortech supercharger, 42lb hr injectors ,ect
how to install reverse glow gauges
