View Full Version : NEED AN AMP QUICK..


yomofoitzjay
05-21-2007, 04:29 PM
HEY GUYS

THEESE ARE THE SPECS ON MY SUBS

12 Inch EFX Metalized Polypropylene Subwoofer Factory Matched Carpet Surface 900 Watts Max Peak Power 300 Watts RMS Powre Handling Fits Perfect into Trunk Corner Speaker Information 900 Watts Max Peak Power 300 Watts RMS Power Handling 4 Ohm Impendence Frequency Response: 25Hz~500Hz Injection Molded Metalized Polypropylene Cone High Power Handling Kapton Voice Coil Bobbon
WHATS THE BEST AMP TO GET FOR THESE..BTW IT HAS TO BE A MONO CHANNEL

THANKS

knucklehead11
05-21-2007, 04:35 PM
Just a decent 300W RMS amp will do. I use an APC602 that puts out 300W RMS bridged, or 150W RMS X 2 for two subs. It's not a lot of power but I use it for my 200W RMS Eclipse SW4000... but I only got low-spec stuff because I don't care to have street bass that blows the neighborhood away, lol. But for your situation with a 300W RMS subwoofer... get an amp like mine or similar and it'll do what you need it to do.

yomofoitzjay
05-21-2007, 04:40 PM
yeah i dont want anything crazy

i had two 12 inch type e's befoe and i thought it was to much

but where can i get a 300 rms amp for cheap

thanks

PReal
05-21-2007, 05:23 PM
How many of those subs do you have? What is your budget? I can go just about as cheap as you want.

Remember knucklehead, if he has two of those subs he needs closer to 600 watts rms. It is always great to have too much power, but low power is what blows speakers due to amplifier clipping!

knucklehead11
05-21-2007, 05:32 PM
ORIGINAL: PReal

How many of those subs do you have? What is your budget? I can go just about as cheap as you want.

Remember knucklehead, if he has two of those subs he needs closer to 600 watts rms. It is always great to have too much power, but low power is what blows speakers due to amplifier clipping!


I was thinking he only had one sub, doh! lol
Yeah don't worry I know that would clip the hell out of two subs haha... my bad... sorry for the confusion

yomofoitzjay
05-22-2007, 03:20 AM
no i only got one 300 watt rms amp..whats the best mono channel amp for that..

PReal
05-22-2007, 10:48 AM
How many of those subs do you have, or have you been referring to a single sub as subs.

yomofoitzjay
05-22-2007, 09:07 PM
oh i only have one sub..and i need one amp for it...

PReal
05-23-2007, 10:58 AM
For cheap...

http://ikesound.com/product-product_id/2552$97

Even cheaper...

http://ikesound.com/product-product_id/2839$55

mustangman02232
05-23-2007, 12:21 PM
get a profile amp

what kind of componets did you buy

yomofoitzjay
05-24-2007, 12:46 AM
is this good or will it blow my sub out

http://cgi.ebay.com/PROFILE-AP700M-MONO-700W-CALIFORNIA-CAR-AMPLIFIER-NEW_W0QQitemZ120120954686QQihZ002QQcategoryZ64570Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem

PReal
05-24-2007, 10:37 AM
That amp will be fine.

Jst get ikesound or woofersetc to match the million buy price.