Our Products
 

Magnaflow is pleased to be part of the Mustang forums community and to announce that we offer a cat back exhaust system for 66.5 to 07 model Mustang. For specs on the system’s configuration, pipe size, layout and tip configuration, see link below:

http://www.magnaflow.com/02product/shopdisplayproducts.asp?SID=4Ford&zone=America n&id=140&cat=Mustang

The cat back system for these applications have been dyno verified to make 11-17 hp and 10-15 lbs. ft of torque depending on the year and type of system you choose. This system features full mandrel bends (no compression bends, like those done at muffler shops) for maximum flow and a straight through, wide open muffler with NO baffles, NO chambers and NO restrictions.


The system installs with simple hand tools and in most cases, can be installed by the average do-it-yourselfer in 30-60 minutes.


The system is backed by the best warranty in the business (LIFETIME). See link below for more info

http://www.magnaflow.com/wideopen/warranty.asp


For a Dealer in your area, click here: http://www.magnaflow.com/03dealer.asp

To buy from one of our Nationwide Retailers, click here

http://www.magnaflow.com/03buyonline.asp

RE: Our Products
 

RE: Our Products
 

Sorry, I can't see anything in your post. Please try again.

RE: Our Products
 

I Absolutely love my Magnaflow 15881 for my 06 Mustang GT I bought mine from FasterThanThem.

You can check it out here: http://www.fasterthanthem.com/produc...t=0&page=1
05-07 GT 4.6L V-8
2.5" MagnaFlow Dual Exhaust System. Ford Mustang Exhaust System
15881

Its cost a little more than other vendors like Allexhaust.com and justmagnaflow but I figured I'd go with an authorized vendor in case of problems. - No Regrets sounds amazing and you can feel the power

RE: Our Products
 

Tommy:

Great to hear that your happy with your system!

RE: Our Products
 

Howdy, I've got my 2008 GT being made right now, and while i was looking around, my first choice was going to be the Roush 427R, in my opinion,the exhaust had the best sound out of all the options in the showroom (Shelby, Saleen, Stock, etc..) it's what made me choose the 427R over anything else to begin with. ie.. exhaust sound is important to me.

Anywho, me and the dealer couldn't come to an understanding with the price, so i'm just gonna build mine completely custom (which i'm 100% more happy with now that i'm doing it) ANYWAY.. lol..my question... in looking into details about the 427R - i've come across information that says the 427R exhaust is a MAGNAFLOW cat back system - and yet Roush has a set on his website for sale and they're stamped with Roush logos - and he says he tuned and ported them from stock..

does magnaflow offer a same as - axle back system ?

i've looked and listened on your website, and the 3 systems that i see are 15881, 15882 and 15883. to me, the 15883 is very close, but i think not exactly (hard to tell over a computer)

are these "bolt-up" systems ? or do they require welding? and since i don't have my car just yet, do you know whats involved with removing the stock exhaust ?

thanks in advance! i really appreciate it.. great products ya'll have! =D

RE: Our Products
 

Unfortunately we don't offer a system for the Roush. All of our direct bolt on systems are for the raer exit GT and GT500. We do offer the same size mufflers used in our Magnaflow and Magnapack cat-back systems. They can be seen here:

Magnaflow 4x9x14" oval - http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=586

Mangapack 4" Round x 14" - http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=654

You could use two of either muffler and have a local installer custom make the system for you.

Dealer locator - http://www.magnaflow.com/03dealer.asp

Please let me know if you have any further questions. Thanks for the kind words!!

RE: Our Products
 

thanks for your time, and information, those definately provide me with another option.

RE: Our Products
 

No problem. Happy to help.