stangman94

This summer I plan onadding either a superchager or a stroker I know what the prices are for a blower but how much is a decent 347 stroker kit. I will get a cam as well once I figure out which way I am going with my car.

__________________
Trickflow heads and intake, Steed #19 cam, rebuilt 306

MEM 302 5.0L

someone on these forums (fullauto or something like that) sells stroker kits...they are pretty decent from what ive heard...

__________________
~1981 Notch, GT body kit, and Saleen wing
AOD, w/ 2200 stall, transgo shiftkit, Cold air intake, equal length headers, offroad midpipe, flowmasters, 4.10's, and my smog stuff is removed.

stangman94

full auto does

__________________
Trickflow heads and intake, Steed #19 cam, rebuilt 306

r.barn

Just put a good turbo kit on there.
Will make more power for same money.

You will need all new heads, cam and intake for a 347 to
get the power out of it that it is capable of.

Figure on spending $5,000 for either after its all said and done.

__________________

"They that can give up essential liberty to obtain a
little temporary safety deserve neither liberty nor safety."

Ben Franklin
Plaque in Statue of Liberty

white94

http://www.tandlengines.com/347_stroker.html


I am ordering one of these guysthis summer. Screw building one, these guys have a 1 year 12,000 mile warranty and a DVD of your specific engine being dynoed at their facility. They build engines for NASCAR, etc. I have talked to them several times, you can't beat 430 hp and 444 ft/lb for around $4k

ruger311

yeah looks like a pretty nice engine but youre probably not going to get much more outta it i bet its at least 10.1 compression and i bet that was with a carb setup not EFI

__________________



Dart IE 347HP Stage 3 T76 @ 11.75#s 600RWHP 611RWTQ lightly tuned PUMP GAS
Drag Radials 12.2 @ 123mph, slicks 11.2 @ 122 rear end gettin loose in 3rd and 4th