Att: Need help from all Series II supercharger owners
I am installing a series II back on my car and I forgot some of where the vacuum lines go in the supercharger. Can someone send me close engine pics of the blower and the vacuum lines on the charger and where they pertain too. Any help appreciated.
Johnny
__________________
2000 Saleen S286 SC #00-0346
286 ci HCI forged block with Series II blower, griggs road racing suspension and weighing in at 3050lbs.
2000 Mustang GT with Saleen kt(for sale)
Sponsored Links
This ad is not displayed to registered members. Register your free account today and become a member on Mustang Forums!
RE: Att: Need help from all Series II supercharger owners
yeah can I have some more of the front where the belts are. tHanks'
johnny
__________________
2000 Saleen S286 SC #00-0346
286 ci HCI forged block with Series II blower, griggs road racing suspension and weighing in at 3050lbs.
2000 Mustang GT with Saleen kt(for sale)
RE: Att: Need help from all Series II supercharger owners
Semperfi, his Saleen is an 03, and has a different blower and setup compared to yours. Saleen will fax you a complete diagram if you call them. Pics can be difficult sometimes, so to be safe, call Saleen 1-800-888-8945.
__________________
02 S281E #60 R.I.P.
01 S281 #582 Procharged
07 S281E sometime right before hell freezes over
http://www.ihra.com/profile/topfuel/rick_cooper.html
http://ihra.com/statistics/points/2006/TF.htm
RE: Att: Need help from all Series II supercharger owners
Quote:
ORIGINAL: Birdieman4
Semperfi, his Saleen is an 03, and has a different blower and setup compared to yours. Saleen will fax you a complete diagram if you call them. Pics can be difficult sometimes, so to be safe, call Saleen 1-800-888-8945.
Yes he has the twin screw but the set up is basically the same. I was just wondering on the vacuum lines that go from the bottom of the blower to the black looking thing on the right side of the supercharger. Everything else I pretty much figured out. Thanks though but trying to get through to a Saleen rep even if you have a Saleen is hard.
Johnny
__________________
2000 Saleen S286 SC #00-0346
286 ci HCI forged block with Series II blower, griggs road racing suspension and weighing in at 3050lbs.
2000 Mustang GT with Saleen kt(for sale)
RE: Att: Need help from all Series II supercharger owners
Quote:
ORIGINAL: semperfi510
Quote:
ORIGINAL: Birdieman4
Semperfi, his Saleen is an 03, and has a different blower and setup compared to yours. Saleen will fax you a complete diagram if you call them. Pics can be difficult sometimes, so to be safe, call Saleen 1-800-888-8945.
Yes he has the twin screw but the set up is basically the same. I was just wondering on the vacuum lines that go from the bottom of the blower to the black looking thing on the right side of the supercharger. Everything else I pretty much figured out. Thanks though but trying to get through to a Saleen rep even if you have a Saleen is hard.
Johnny
hard is an understatement, their customer service is horrid
__________________
“A patriot must always be ready to defend his country against his government.”-- Edward Abbey
RE: Att: Need help from all Series II supercharger owners
Quote:
ORIGINAL: Birdieman4
I believe the ones you are talking about are lines that just need to be sealed.
i upraded from a series I to a II but what hose would be sealed. I sealed one because two used to plug into the hat looking thing but the series II only has one hole.
JOhnny
__________________
2000 Saleen S286 SC #00-0346
286 ci HCI forged block with Series II blower, griggs road racing suspension and weighing in at 3050lbs.
2000 Mustang GT with Saleen kt(for sale)
Att: Need help from all Series II supercharger owners
