Posts: 21
Joined: 3/29/2003 From: United States Status: offline
I just got some Eagle Alloy Cobra R knockoffs, polished. They are all 17x9. I mounted 255\40R17 all around. The fronts stick out about a 1/2 inch from the wheel wells, and the backs tuck in with room to spare. Should I just put spacers in the back to bring them out, or change the fronts? I like the tough look of a wider footprint.
Also, what kit should I use to lower the car about 1.5 inches?
Posts: 33
Joined: 3/23/2003 From: United States Status: offline
hey dude i have the exact same wheels. what center caps are you using? i wanted some different ones or possibly some stickers to put over the eagle stick any ideas where i could find them?
Posts: 21
Joined: 3/29/2003 From: United States Status: offline
I have the Eagle Alloy cap on there. I may order some caps from MustangsUnlimited or some other catalog. Its not a big deal, but the offset is. What are you doing about the offset?
Posts: 14
Joined: 5/14/2003 From: United States Status: offline
I have a 94 gt with the same wheels and same wheels and 255\40s i hade the same problem and i got half inch wheel spacers it helped alot, they only cost about 15$ but my lug nuts are now holding about three threads, so any larger wheel spacers are around 150.00 because they have larger studs on them.
Printable Version
Wheel Offset - 
