is this kit able to go on a completly stock front suspension aside from a set of H&R springs ..?

second thing is i bought a set of front spring isolators from you guys i understand where the disk isolator goes
but where does that long urethane tube go that comes with the kit..

thanks in advance for any help...
Kevin

Yes, it will go on a completely stock suspension... it is designed to fix bumpsteer on any 94-04 lowered Mustang.

The tube on the isolators goes on the bottom of the spring, around the coil itself... like a Jacket... The reason why is because the bottom coil just dead ends... without meeting the other coil above it... so a flat isolator will not work.

wow.. im a do0f.. that makes perfect sense now just hope it will fit those coils are kind of tight.

are offset rack bushings the same as A arm bushings

bump.!

Sorry for the late reply... no offset rack bushings go in your steering rack.

A-arm bushings go in your front control arms (mounting/pivot point for the front arms).

They work on different areas of the suspension.