john111987

I bought a pypes o/r x pipe and it didnt fit on my 07 s281sc. The front o2 sensor on the passenger side pushed up against the tranny, and would not fit. Just wanted to know if the saleen's have a different transmission or if it was a poorly made pipe.

__________________
07 saleen s281SC #97 JDM 3.2 & tune, ARH longtubes with o/r H, plugs, maf & filter, fidanza aluminum flywheel, fidanza 4.3 clutch, vacum line upgrade, gt500 pumps
471rwhp/463rwtq on dynojet prior to longtubes, clutch and flywheel

daydark

It's a Tremec 3650 tranny just like the 05+ Mustang GT's have. You can just take the midpipe to any muffler shop and have them weld in a new bung for your 02 sensor at a different angle. Make sure they don't angle it below 4-oclock or below 8-oclock, as condensation can build up and ruin the sensor. This should fix your problems.

__________________
2006 Saleen S281 #839
Saleen S/C @ 10 PSI (JDM)

SCT, C&L, ARH, Centerforce, Fidanza, Driveshaft Shop, CHE, BMR, LPW, Meziere,
MGW, Speed of Sound, Innovate, AutoMeter, Raptor,

06SaLeEn

I had no issues with mine.

sowaxeman

Thats odd John - mine fit fine. I do recall the passenger side sensor being a b!tch to get to though. If there is no tweaking that you can do to get it to fit, I would call who you bought it from and get it exchanged - suppose its possible it was cut in a tad off.

__________________
Jason Smith
Saleen Club Of America - Central Region Director
http://www.saleenclubofamerica.com/Central

1982 GT : 1985 GT 'Vert : 2005 S-281 #92