new shift knob (Full Version)

Mustang >> Ford Mustang Tech >> Saleen, Roush and Boss Mustangs

new shift knob

zoomo6 -> new shift knob (3/18/2007 11:55:45 AM)
How do you remove the shift knob. Are there set screws under the cap?I think I am going to install a T-Handle on it.

zoomo6 -> RE: new shift knob (3/18/2007 11:57:31 AM)
This is a 2006 sc281 vert.

demarcom -> RE: new shift knob (3/18/2007 12:23:54 PM)
no screws, it just threads onto the lever. You will want to pull up on the shift boot by squeezing the long sides in and up. Then put a visegrip on the lever and a channel lock on the knob (part under the shift boot to keep from knarling up the good part) and I think it's regular thread lefty loosy.

Jonsey -> RE: new shift knob (3/18/2007 2:00:15 PM)
They lock tite the 2006 knobs on. I could never get mine off. Had three people try. We even took the whole shifter out fo the car and put it in a vice. No dice. I replace the stock unit with a Steeda Tri-ax. Good luck. I hope yours is easier than mine was.

zoomo6 -> RE: new shift knob (3/19/2007 10:13:51 AM)
I will give it a try. Thanks

sowaxeman -> RE: new shift knob (3/19/2007 12:46:12 PM)
Mine unscrewed right off - but it is an '05. I put a black B&M T on mine and I love it [:)] Let me rephrase that - mine unsrewed "left" off. Its standard lefty loose righty tighty [;)]

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.