goatman

I recently installed a pair of Infinity Kappa 572.5cf 5X7, 100w RMS, 300W peak on a JVC KD-LH300 deck. I am experiecing feedback (or cracking) at high volume. What causes this? How do I fix it?

Any help is appreciated.

Thanks,

Todd

mdvaldosta

you (had) got the mach 460 system?

goatman

No, I got the stock system, I was advised to stay away from the Mach.

Acewelder99

start off checking simple things like all connections and make sure there are no bare wire anywhere. You may be putting to much power to the speakers and they would give cracking sound.

__________________
2001 GT 80mm mass air, 80mm throttle body, 1 inch throttle body spacer, 1/2 inch intake plenum rise, free flowing intake plenum, vortech supercharger, 42lb hr injectors ,ect

stangcrazy

I agree with ACE look for loose ground connections and bare wire. For the popping try adjusing your bass a little lower at those higher volumes.

Acewelder99

also check and make sure that nothing is touching the speaker because that could give you a cracking sound. Let us know how you made out!

__________________
2001 GT 80mm mass air, 80mm throttle body, 1 inch throttle body spacer, 1/2 inch intake plenum rise, free flowing intake plenum, vortech supercharger, 42lb hr injectors ,ect

goatman

Checked all the wires, no problems. I think is may be that the Infinity's can't handle the high volume so I'm going to install some pioneers....

Thanks for the help.