Very limited 347 kit sale
Login  | |
|
Very limited 347 kit sale - 1/29/2007 11:21:24 PM
|
|
|
FullAuto
Posts: 2697
Joined: 1/18/2006
Status: offline
|
I have a few specific kits I'm going to sale extra cheap. Here's the story behind them. I ordered them in as stock and they were shipped to me with the wrong pistons. These kits come with an individually boxed crankshaft, pistons, rods, rings & bearings and come in a larger sealed box from Scat. I had to open the larger box and pull out the box of pistons. I also had to cut open the rings and bearings box and send back the rings since they were the wrong size. I have now received the new (correct) pistons and rings. Since the original seal has been broken on these kits, I don't want to reseal them and ship them out this way to my normal customers. So.... I'm being very clear that these are RESEALED kits. Everything is new in the box. I'm selling these off cheap to just reorder and replace these with factory sealed kit to mail to my normal customers. Here is what they come with:
Scat Series 9000 3.4" cast steel crankshaft
Scat 5.4" 4340 forged I beam rods with 3/8" ARP cap screws
Probe forged SRS flattop .030 over pistons with both inline and TFS TW valve reliefs
Total Seal rings
Clevite 77 bearings
The conditions of this sale are:
No substitutions or upgrades available on these kits.
All orders must be prepaid and funds must clear where applicable.
CASHIER'S CHECK ONLY at these prices. Add $25 for paypal.
No returns or refunds. These kits are NEW and everything is there. This is from a business. I am a Master Warehouse Distributor for Scat. I have many, many kits in stock, but only a small select few fall into this sale.
I have (7) SEVEN kits for this sale. First pay, first serve.
$799 & FREE SHIPPING TO THE LOWER 48 STATES!!!
< Message edited by FullAuto -- 1/29/2007 11:25:53 PM >
|
|
|
|
|
|
|
RE: Very limited 347 kit sale - 3/1/2007 11:16:39 PM
|
|
|
Boosted5.slow
Posts: 91
Joined: 1/5/2007
Status: offline
|
no what crank pulley would u suggest for more boost right now im at 5-6psi im trying to get 10-12 psi
_____________________________
/TRICKFLOW STAGE 1 CAM/Holley systamax/MSD DISTRB/SHORTYHEADERS/DUAL40SERISFLOWS/nos plate system/
|
|
|
|
|
RE: Very limited 347 kit sale - 3/30/2007 9:10:14 PM
|
|
|
stangman94
Posts: 1533
Joined: 10/8/2006
From: Michigan
Status: offline
|
If only I had the money I would jump on it 
_____________________________
HCI and bolt ons
|
|
|
|
|
RE: Very limited 347 kit sale - 4/2/2007 1:26:17 AM
|
|
|
88ttop5.0
Posts: 356
Joined: 2/20/2007
From: Westchester NY
Status: offline
|
is that all that is required to make a 347 stroker minus the machining of the block?
_____________________________
1988 mustang gt 5.0 t-tops,brand new 5.0 engine block 0 miles getting built to a built 306
2002 Ls1 camaro six speed slp lid,slp bolt on subframe connecters, slp skip shift, slp loudmouth2... Chevy and ford in the drive way
|
|
|
|
|
Printable Version
