Very limited 347 kit sale (Full Version)

Mustang >> Vendors & Sponsors >> Vendor For Sale / Group Buy Classifieds

Very limited 347 kit sale


  

FullAuto -> Very limited 347 kit sale (1/29/2007 11:21:24 PM)

I have a few specific kits I'm going to sale extra cheap.  Here's the story behind them.  I ordered them in as stock and they were shipped to me with the wrong pistons.  These kits come with an individually boxed crankshaft, pistons, rods, rings & bearings and come in a larger sealed box from Scat.  I had to open the larger box and pull out the box of pistons.  I also had to cut open the rings and bearings box and send back the rings since they were the wrong size.  I have now received the new (correct) pistons and rings.  Since the original seal has been broken on these kits, I don't want to reseal them and ship them out this way to my normal customers.  So.... I'm being very clear that these are RESEALED kits.  Everything is new in the box.  I'm selling these off cheap to just reorder and replace these with factory sealed kit to mail to my normal customers.  Here is what they come with:

Scat Series 9000 3.4" cast steel crankshaft
Scat 5.4" 4340 forged I beam rods with 3/8" ARP cap screws
Probe forged SRS flattop .030 over pistons with both inline and TFS TW valve reliefs
Total Seal rings
Clevite 77 bearings

The conditions of this sale are:

No substitutions or upgrades available on these kits.
All orders must be prepaid and funds must clear where applicable.
CASHIER'S CHECK ONLY at these prices.  Add $25 for paypal.
No returns or refunds.  These kits are NEW and everything is there.  This is from a business.  I am a Master Warehouse Distributor for Scat.  I have many, many kits in stock, but only a small select few fall into this sale.

I have (7) SEVEN kits for this sale.  First pay, first serve. 

$799 & FREE SHIPPING TO THE LOWER 48 STATES!!!


  

Boosted5.slow -> RE: Very limited 347 kit sale (3/1/2007 11:16:39 PM)

no what crank pulley would u suggest for more boost right now im at 5-6psi im trying to get 10-12 psi


stangman94 -> RE: Very limited 347 kit sale (3/30/2007 9:10:14 PM)

If only I had the money I would jump on it [:(]


88ttop5.0 -> RE: Very limited 347 kit sale (4/2/2007 1:26:17 AM)

is that all that is required to make a 347 stroker minus the machining of the block?


FullAuto -> RE: Very limited 347 kit sale (4/4/2007 11:59:42 PM)

quote:

ORIGINAL: 88ttop5.0

is that all that is required to make a 347 stroker minus the machining of the block?
They require a 28oz balancer and flywheel/flexplate if you have the 50oz stuff that came in the late model 5.0s.


my77stang -> RE: Very limited 347 kit sale (4/8/2007 3:20:25 PM)

with mine being fragged i wish i had the money. it's cheaper than buying a stronger 289/302 crank/rods/forged pistons/rings/bearings.

hey full, you see how bad i fragged mine? would make a great display piece for your business if you wanna "donate" a kit for me [:D][:D][:D]


jnsnams -> RE: Very limited 347 kit sale (1/29/2008 11:02:05 PM)

DO YOU STILL HAVE A KIT LEFT? AND WERE ARE YOU LOCATED? IAM INTERESTED IN A KIT...


  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.