bmob

hey guys,
i just got a saleen spyder soft tonneau cover thats for 90-93 saleen verts. i want to install it on my 90 gt. vert. does anyone know how to install it?
it came with no instructions, i have 3 aluminum bars and some misc. hardware. any help would be great
thx
bryan

suhleen

The rear part of the tonneau cover installs like the stock convertible boot cover (the plastic tabs slip under the molding). The 3 aluminum bars slip into the tonneau cover and support the center section of the tonneau cover (the area that will cover the rear seats). The front part of the tonneau cover snaps into place using snap buttons that need to be installed on the trim panels. I have the same cover on my '90 Saleen convertible. Mine also has the light bar and windscreen option.http://www.cafords.com/images/shows/...4/DSC06113.JPG

__________________
'86 Saleen #12
'89 Saleen #324
'90 Saleen #252
'95 Saleen S351R #91
'95 Saleen S351R #109
2004 F150 Super Crew FX4

bmob

the part i dont understand is the 3 aluminum bars. they are different sizes and dont look like they will even fit correctally. also there is 2 hloes in the tonneau, (towards the front on the sides)
i also got two black screw things that mount somewhere?(i think in those holes, but how?)
I need to install this from scratch, like saleen had to. i neeed to know what bars go exactally where, and how all the hardware is used and placed. i know im asking alot, but im lost? i emailed Saleen and no response yet?
thx
bryan