how...

Printable Version

Mustang >> Ford Mustang Tech >> Classic Mustangs >> how...

Page: [1]

Login Message << Older Topic   Newer Topic >>

how... - 10/15/2004 2:52:32 PM    /77ustang_Guy   Posts: 16 Joined: 3/11/2004 Status: offline how hard is it to replace the rubber weather striping around the front and back windshields? can i do it myself? thanks... Post #: 1

RE: how... - 10/15/2004 7:31:59 PM    67coupe   Posts: 327 Joined: 5/8/2004 Status: offline It isn't very hard to do. You need a tool that is made for releasing the trim clips. NAPA should have it. The old seal can be cut to reduce chance of cracking the windshield on removal. If you have a heated garage then the new rubber is easy to work. If it is cold it will wear you out. (in reply to /77ustang_Guy) Post #: 2

RE: how... - 10/18/2004 6:08:53 AM    65_2plus2 Posts: 392 Joined: 3/30/2004 From: Arizona Desert Status: offline You can do them both in an afternoon if you have all the stuff that's required. Good Luck (in reply to 67coupe) Post #: 3

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Top 10 Posters
pro50sc 17921 nanaki 14685 88bluegt 14536 dan04cobra 14532 addermk2 13995 ride of the 13714 hotrods_n_bo 13326 2000gt4.6 12516 mustangman02 11989 1slo85 11744

New Vendors
Extreme Dimension
BMR Fabrication
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
BrandMotion