iamvillani

ok so how do i remove my rear seat...can't seem to find it in my chiltons. thx

__________________
1987 vert with a 1990 5.0, restoration in the works

Mac exhaust, bolt ons.

wythors

First off, pitch the Chilton's in the trash. It's not worth the paper it's printed on. Check eBay for a set of factory manuals.

Now. For the base, just grab the front edge and pull firmly up. It pops right out. Now look under the lower edge of the seat back in each corner. You'll see a bolt head in each corner, but they're kind of hidden under the bottom edge of the back. Unscrew the two bolts and pull down on the seat back. It will come out of the rail at the top. Installation is the same but reversed. Getting the bolts back in the holes is tricky, just be patient.

__________________
1993 5.0 LX 'Vert

GT-40X303 heads, E-cam, 1.6 roller rockers,
Cobra intake, Edelbrock 65mm t/b, 73 mm C&L, CAI,
24 lb injectors, AFPR, 3.73's, March underdrives.
FRPP headers, Bassani catted X, SLP Loudmouth.
Pony R's with Eagle ZR's.

iamvillani

thanks man...and i will check out the factory manuals.

__________________
1987 vert with a 1990 5.0, restoration in the works

Mac exhaust, bolt ons.