I am bored so I was looking up things on ebay, and I searched for a 03-04 Terminator cobra S/C and came up with there old eaton blowers for like 200 bucks. Would you be able to use them on our 4.6L 3v or what?
Team MF Member #021 Posts: 2875
Joined: 7/11/2006 Status: offline
you cannot use eaton blower on our cars.. you are gonna need to replace many parts.. first, you need cobra heads and all other cobra engine parts and 200 eaton S/C= junk!
_____________________________
Slow Zincyellow 2003 Cobra "SOLD" upper only - 455rwhp -478rwtq
You would have to have a lower fabbed for the blower to bolt on to. Then you would have the fun of routing the belt, the cost of injectors, bap, fabbing a intake, tuning, and much more.
You would be better off getting a used vortech, paxton, novi etc and fabbing a mount. You could do that much cheaper. But I would stick with a kit. You should be able to find a non intercooled s/c setup for 3K
_____________________________
07 Vista Blue GT/CS Black/Dove 5 speed manual C&L Racer,VMPTuning, Zoomers A/B,CMCV DP's,UDP,ARH LTs & O/R Xpipe, BMR, KW
S/c'es are just a simple lets throw this here, put this belt here, put in new plugs and hit the gas, THey are a total bitch to retune install blah blah, esp if its not a kit for your car.