trade me for my built 5.0!
Login  | |
|
trade me for my built 5.0! - 10/17/2006 10:22:16 AM
|
|
|
4eyedfreak
Posts: 693
Joined: 8/17/2005
Status: offline
|
I think that i have lost interest in my current car and i woul dlike something a little more streetable, this car is streetable but i built it up to much and now i would like eaither a bike, quad, snowmobile, or newer mustang.....no verts or v6's. Here it goes.
1983 FORD MUSTANG G.T
Originally when I first bought the car in august of 2004 it only had 65,000 miles on it. It was stored for 11 years and was not touched. I bought it, put my first full tank of gas in it and then my whole rebuild began. It turns out that since it was stored for 11 years and was not stored “properly” the fuel tank had rust in it. So naturally after the first full tank I experienced problems. After figuring out what the problem was I started rebuilding and moding. Since then, I have replaced the fuel tank and sending unit (all bought from Texas mustang). After that I have done the following:
Starting in the rear:
· New fuel Tank and sending unit
· Electric Fuel pump (Holley 255) and fuel lines/filter mounted to bumper
· New fuel line from rear to front
· Swap out 7.5(stock) for 8.8 w/3:73 gears all new seals
· Strange 31 spline axels
· Strange c-clip eliminator
· Fresh rear end fluid with additive and only 100 miles on it since.
· Mac solid upper and lower control arms (o miles)
· 50/50 Lakewood struts (0 miles)
· Brand new drum brakes (everything replaced, 100 miles)
· FRPP Aluminum Drive shaft with drive shaft loop (100 miles)
· G force t-5 with stage 1 zoom clutch, pro 5.0 shifter (o miles)
· Blow proof bell housing (Lakewood)
· Qa1 k-member and control arms
· Lakewood 70/30 front shocks
· D&D CASTER CAMBER plates/coilovers (0 miles)
· Flaming river manual rack
· Frpp sub frame connectors
· Optima battery
· Mac long Tube headers
· Mac h pipe and flow master muffs
· Fresh paint black in the engine bay
· No a/c no p/s no s/p
· Nos plate and nos set up, I never sprayed on the car and it was never hooked up but I have it
· All sits on mt street et’s brand new (o miles) rear 10.5
· Weld wheels in rear
· 4 inch skinnys in front with weld wheels
· Harwood 2.5 inch lift off hood
I think that is everything but I might be missing things,
You really need to see the car to know what’s up.
I have an aluminum radiator with a 2800cfm fan that is not in the radiator needs to be installed and maybe some wiring for the headlights and its ready to go. I took it apart to do the k member and its done but I am out of time and I need to move out of the house. I am asking 5900 since it is not finished but the car is worth more and I need the cash ASAP. Please let me know if you are interested. My # is847-409-5127
Or email me at anthonys@pumpsupplyinc.com
Thank you,
Anthony
I also have pics that i can send upon request. Please let me know what you might have. I also have some cash to spend, so if your car is new let me know and maybe we can work something out.
 Attachment (2)
< Message edited by 4eyedfreak -- 10/17/2006 10:24:21 AM >
_____________________________
83 GT
306CI SMALL BLOCK
11.2 @ 120.2MPH (Now gone)
Looking for new project
|
|
|
|
|
|
|
Printable Version
