How-to: Double-Din HU for SN95 (Full Version)

Mustang Forum >> Ford Mustang Tech >> Audio/Visual Electronics

How-to: Double-Din HU for SN95

  

Zero 16X -> How-to: Double-Din HU for SN95 (9/21/2006 11:58:49 PM)

Is there anyone who can help me with my problem? I want to install a Kenwood Excelon DDX8017 DD HU http://www.sonicelectronix.com/item_5596.html# in my 97 GT and am having problems finding conversions or instruction on how to install a DD in my car. So if ANYONE can help it would be greatly appreciated ^_^

  
jon6113 -> RE: How-to: Double-Din HU for SN95 (9/22/2006 12:30:59 PM)

I have a 1999 Mustang GT. I removed my dark charcoal AC/radio bezel and replaced it with a double din one from a 2003 Mustang. The colors match exactly and the new piece fit well in my car. I was then able to install the Pioneer AVH-P6800DVD. 2001-2004 Mustangs come with the double din radio bezel. I know they fit in the 1999-2000 Mustangs, but I don't know about 1997. I am at work, so I don't have any pictures of my setup with me.

laserred38 -> RE: How-to: Double-Din HU for SN95 (9/22/2006 7:40:58 PM)

earlier SNs are the same 94-2000....how did it fit?..what did you do...please do a write up as many of us want to do this!

BigBen09 -> RE: How-to: Double-Din HU for SN95 (9/22/2006 8:02:24 PM)

that will be nice post pics

Zero 16X -> RE: How-to: Double-Din HU for SN95 (9/24/2006 10:12:38 PM)

I thought the New Edges had 1.5 dins?
Oh well... That DD fit so I would also like to know ho you did it?

ttocs -> RE: How-to: Double-Din HU for SN95 (9/25/2006 9:30:25 AM)

the dash on those did not change much with exception of the radio until just a couple years ago. You should be fine. check ebay, they are on there alot.

laserred38 -> RE: How-to: Double-Din HU for SN95 (9/25/2006 3:14:01 PM)

yea the trim piece is available anywhere...but what we don't know is if it just bolts in place or if it takes modification...because i know where my trim piece bolts in...that would definitely be right behind the radio opening on the DD dash...so it wouldn't fit right

ttocs -> RE: How-to: Double-Din HU for SN95 (9/26/2006 5:11:48 PM)

thats true, there are the two screws under the deck. I don't think it would be a problem if those two were not put back in as long as the one in the back matches up.

  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.