need mods

2001v6roush · 09-13-2006, 07:38 PM

i want my roush to run in the low 14's without spending a **** load and i was thinking of putting nitrous on it
i was wondering who has put nitrous on it and what kind of other **** i would to make it run healty and what kind of shot thanks for the help

jthorn9 · 09-13-2006, 07:42 PM

75 shot is perfectly OK on a stock sixer, but 100 may be pushing, only other thing I can think of is a turner so that a shop can properly tune your ecu so that you don't blow your cylinders through your hood.

tommy2273boy · 09-13-2006, 10:50 PM

do you need a tuner if you're putting on a UDP?

africkanV6 · 09-14-2006, 12:58 AM

no....but i think u need a tuner even if you have a stock motor. having a good tune is always better than a stock tune

BlackPony99 · 09-14-2006, 05:20 AM

gears and posi would also help you out a lot in dropping your 1/4 mile time.

mustangman02232 · 09-14-2006, 01:31 PM

set of heads from supersix $800

4.10s $200
detroit true trac $400
tuner $400

sorry though, that might get you high 13s if you put 255s on stock rims

wills98cobra · 09-14-2006, 02:11 PM

i put 120 shot on my sixer a couple months ago and its doing just fine

2001v6roush · 09-14-2006, 08:16 PM

well it looks like i am going to purchase a 100 shot,

but i dont know what kind of kit to get any suggestions?

and what kind of time slips i will be seeing

jthorn9 · 09-14-2006, 11:37 PM

Visit http://www.jegsperformance.com/ and http://www.mustangsunlimited.com/ for a good kit. I'm gonna say that if you're totally stock, take of about a second off your 1/4, if you have a few bolt ons it may take off a little more.