New stereo making poping noise!?! (Full Version)

Mustang >> Ford Mustang Tech >> Audio/Visual Electronics

New stereo making poping noise!?!

  

Zuarel -> New stereo making poping noise!?! (9/8/2006 1:01:01 AM)

This might have already been answered, but I cant seem to word it right for the search engine, sorry to bother you all again.

I Just bought a Kenwood (KDC-MP532U) head unit for my 2000 GT with the mach system. Now every time I turn on or off the car theres like a "pop" sound that comes from the speakers and after that everything works great. The guy at Best Buy told me that its normal for it to happen to the car and it causes no harm, but I wanted to check with people that care more about there cars and know more about stangs in general.

Any info would be greatly appreciated.

  
ttocs -> RE: New stereo making poping noise!?! (9/8/2006 10:12:46 AM)

Mine does it as well and he is right, it doesn't hurt anything.

I hear if you put a 1k resistor in the remote output from the deck that it will stop? NEver tried it myself...

backinblack06 -> RE: New stereo making poping noise!?! (9/9/2006 12:33:51 AM)

5k resistor in your amp turn on lead will do the trick...

You won't hurt anything with the popping it's just annoying as sh!t after awhile.

Gargy -> RE: New stereo making poping noise!?! (9/10/2006 10:50:44 AM)

Try accessing power from a different wire. Or it might be a ground loop of some sort, in which case you want to try and find a different place to ground it.

DarkMatterDM -> RE: New stereo making poping noise!?! (9/14/2006 11:42:53 PM)

That happens in the '02 Mustang with an amp hooked to factory speaker locations, but in the '99 it will not do that with amp hooked to the subs. Newer amps come with some sort of protection turn on feature that will prevent this, but there should be some simple resistor connetion to connect to the remote wire im guessing to prevent it.

Unknown -> RE: New stereo making poping noise!?! (9/14/2006 11:47:15 PM)

its just the amp turning on, prolly need some sort of wire adapter to go from the new head unit to the old wire harness so it uses the amps and old harness right. something like that

  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.