Hey guys.
after doing a search I found some helpfull stuff but wanted to post this to see if any new ideas had surfaced or if anyone has some good advice for me.
Pics if it'll help:
http://www.mustangforums.com/m_1726573/tm.htm
I'm currently running:
Pionner DEH-P980BT headunit
MTX 4 Channel amp (RTX 480p i think)
HiFonics Cycopls mono block amp (175 W RMS I think)
a Capacitor
STock Speakers (stock door subs not connected) running off the MTX
2 Pioneer 10" TSC-1000W (old subs, still work, running off the HiFonics)
Stock battery.
*Anti Rust thing on battery (more later)
The Wiring is "oxygen sealed" or some term my installer told me telling me they're good
all New wiring from Headunit to 4 channel amp + mono block amp
4 guague wiring used
I have Engine whine.
it's not bad, but it's there and it gets progressively worse above 2500RPM
As far as I know, the install was quality. I used a trusted source, with a very good installer and it's a very ncie and clean job.
Does anyone have any input as to what could be caussing the whine. Any advice is appreciated
*The car came with one of those electonic rust inhibitors that hook up to the battery. Apparently this puts a low level charge through the car to keep the molecules moving so rust doesn't form. Something about turning the car into a DIODE. Could this be the culprit?