make sticky? 03/04 cobra mods and dyno #s

Printable Version

Mustang >> Ford Mustang Tech >> 4.6 (Modular) Mustang >> SVT Forums >> make sticky? 03/04 cobra mods and dyno #s

Page: [1] 2   next >   >>

Login Message << Older Topic   Newer Topic >>

make sticky? 03/04 cobra mods and dyno #s - 8/31/2006 10:57:06 AM    freewilly Posts: 378 Joined: 5/5/2006 Status: offline everyone with an 03/ 04 cobra post your mods, and dyno#s,and 1/4 times, and max boost,if you want a photo too. if you got one. maybe this will be a sticky who knows.i'll go first..i got a 03 cobra vert 27k miles, i got bassanai x pipe no cats,borla stinger exhast, stock manifolds still, accufab single blade with polished plemun,C/L inlet tube,a big air #2400 mass air,K/N FIPK filter,2.75 pulley and idler, 20 psi boost,steeda 03/04 sport springs,M/M full length frame connectors,tri axe shifter,and chip from JMS.hilton boost gauge overlay, my next mods are being done now. JMS porting eaton,and a 6lb lower crank pulley. my dyno date is for sept. 28th will show dyno#'s then. never run my car yet. happy posting. OK dyno #s are in 490rwhp at 5000 rpms and 576 tq at 3500 rpms . run a 12.85 at 114 mph with goodyear F1's spinnig and wheel hopping 1st and 2nd gear. drag nitto's r's too come next one got 1 pass cause of my vert. < Message edited by freewilly -- 9/30/2006 12:27:50 PM > Post #: 1

RE: make sticky? 03/04 cobra mods and dyno #s - 8/31/2006 11:20:51 AM    CobraSnake Posts: 3382 Joined: 1/30/2006 From: Milwaukee, WI Status: offline I have an 04 cobra 13k miles on it. I have a magnaflow catted x pipe, magnaflow cat back, k&n drop in filter, and drag radials. Never been to the dyno yet. My 1/4 time is 12.951 @ 110. Oh and the 1/4 time was without the k&n drop in filter. < Message edited by yellowcobra -- 9/7/2006 4:52:51 PM > _____________________________ too much to list 412rwhp N/A 96 cobra (in reply to freewilly) Post #: 2

RE: make sticky? 03/04 cobra mods and dyno #s - 8/31/2006 1:45:55 PM    4Stangs Posts: 1452 Joined: 6/15/2006 Status: offline 2004 Cobra Mystichrome -Pro Turbo System Turbo Kit Garrett T-76GTS -SCT 2800 MAF -SCT Xcalibrator 2 -Tuned & datalogged by 9# / 18# horsepower by Herman -Kenne Bell Boost-A-Pump -60# injectors -MD Motorsports fuel line upgrade kit with fuel rails -Mangaflow cat-back -MAC off-road H pipe / Jet hot coated -IRS Brace -Full length subframe connectors -DSS Level 5 Cobra halfshafts -E-Boost 2 electronic boost controller -Cobra R rear seat delete -Precision fabrication polished intercooler reservoir Attachment (2) < Message edited by 4Stangs -- 8/31/2006 1:46:41 PM > (in reply to freewilly) Post #: 3

RE: make sticky? 03/04 cobra mods and dyno #s - 9/7/2006 2:43:01 PM    4Stangs Posts: 1452 Joined: 6/15/2006 Status: offline This is a shameless bump. I'd like to see some more Terminators! (in reply to freewilly) Post #: 4

RE: make sticky? 03/04 cobra mods and dyno #s - 9/7/2006 3:41:14 PM    zincsvtcobra Posts: 207 Joined: 8/4/2006 Status: offline 03 Cobra convert, K&N FIPK, Borla Stinger CB, American Supercharger 3" pulley, 13.0 @ 110.2 MPH on street tires and idle launch. Sorry, no dyno numbers yet and not the best pic. Thumbnail Image Attachment (1) _____________________________ 2003 SVT Cobra Convert K&N FIPK Borla Stinger Catback LFP 2.8" Pulley SCT Xcal2 tune (Dallas Mustang) H&R Sport Springs UPR Short Throw (in reply to 4Stangs) Post #: 5

RE: make sticky? 03/04 cobra mods and dyno #s - 9/7/2006 3:44:45 PM    zincsvtcobra Posts: 207 Joined: 8/4/2006 Status: offline How many pounds are you running 4stang? Nice dyno #'s!!! _____________________________ 2003 SVT Cobra Convert K&N FIPK Borla Stinger Catback LFP 2.8" Pulley SCT Xcal2 tune (Dallas Mustang) H&R Sport Springs UPR Short Throw (in reply to zincsvtcobra) Post #: 6

RE: make sticky? 03/04 cobra mods and dyno #s - 9/7/2006 4:00:25 PM    4Stangs Posts: 1452 Joined: 6/15/2006 Status: offline Well, i need to work on the tune, but that was a safe tune with pump gas at about 17 pounds. I'm working on some set-ups to run race fuel, nitrous and 20+psi. It'll take some brain work and dyno time, but i have some lofty goals for that car. I don't want a "dyno racer" if you know what i mean. Thanks for the compliment. (in reply to zincsvtcobra) Post #: 7

RE: make sticky? 03/04 cobra mods and dyno #s - 9/7/2006 6:24:18 PM    Mt Twigbert Posts: 1044 Joined: 3/7/2006 Status: offline Ohh great... Just another FOTM 03/04 Cobra post.. Start a sticky just for 03/04s? Ummmmmm, retarded IMO... _____________________________ Procharged 99 Cobra (in reply to 4Stangs) Post #: 8

RE: make sticky? 03/04 cobra mods and dyno #s - 9/7/2006 6:30:22 PM    4Stangs Posts: 1452 Joined: 6/15/2006 Status: offline I like yellow on a mustang. looks good, zincsvt. (in reply to zincsvtcobra) Post #: 9

RE: make sticky? 03/04 cobra mods and dyno #s - 9/7/2006 6:31:06 PM    zincsvtcobra Posts: 207 Joined: 8/4/2006 Status: offline I figured you had a safe tune and could make way more than that. Easily 700 plus HP with race fuel. _____________________________ 2003 SVT Cobra Convert K&N FIPK Borla Stinger Catback LFP 2.8" Pulley SCT Xcal2 tune (Dallas Mustang) H&R Sport Springs UPR Short Throw (in reply to Mt Twigbert) Post #: 10

RE: make sticky? 03/04 cobra mods and dyno #s - 9/7/2006 7:18:15 PM    spray175   Posts: 722 Joined: 11/7/2005 Status: offline 2003 Sonic Blue Cobra- 8,200 Miles 2.76 Billetflow Pulley w/ Idlers Accufab Throttle Body/Plenum JLT Cold Air Intake SLP Exhaust LFP Heat Exchanger LFP Intercooler Tank NGK TR6's Ford Racing FR500's w/ BFG's Autometer Boost/Vac Gauge Billetflow IRS Brace Never had it dynoed and never ran it at the track yet. Thumbnail Image Attachment (1) _____________________________ 03 Sonic Blue Cobra #322 Hellraiser Twin Turbo Kit, Spec 3+, Magnapacks, Bogart RT's (in reply to zincsvtcobra) Post #: 11

RE: make sticky? 03/04 cobra mods and dyno #s - 9/7/2006 10:36:20 PM    zincsvtcobra Posts: 207 Joined: 8/4/2006 Status: offline Thanks 4stang. Those FR500's really look at home on your ride Spray. Nice job! _____________________________ 2003 SVT Cobra Convert K&N FIPK Borla Stinger Catback LFP 2.8" Pulley SCT Xcal2 tune (Dallas Mustang) H&R Sport Springs UPR Short Throw (in reply to spray175) Post #: 12

RE: make sticky? 03/04 cobra mods and dyno #s - 9/7/2006 11:27:52 PM    Blownsvt Posts: 1786 Joined: 7/29/2006 Status: offline 2003 10th anniversay cobra, 2.76 billet flow blower pulley, 3 100mm idlers 1 92 mm idler, jlt cold air intake, magnaflow catback exhaust, tune. I ahve a prochamber and a fluidyne heat exchanger waiting to go on yet too. but with the other mods i dynoed at 443.4 rwhp and 460rwtq. should be at the trakc this weekend for the first time so i'll let you know but i am still running my street tires so traction will be an issue lol. _____________________________ 2003 10th cobra Turbo in progess! (in reply to zincsvtcobra) Post #: 13

RE: make sticky? 03/04 cobra mods and dyno #s - 9/7/2006 11:37:23 PM    JamesTronix   Posts: 398 Joined: 7/10/2006 Status: offline Mods in my sig. Going to the track tomorrow night! Car is about 14-15 psi. http://s84.photobucket.com/albums/k4/jamie660/ _____________________________ 03 Cobra-SOLD! Tuned by RWTD 500rwhp 486 torque New Ride: 03 Z06 Corvette Lunati 24/24 LSA 112 Cam Ported Heads Long tube Headers Breathless Ram Air U/D Pulley Tuned by Aaron Scott@South GA Corvette 442rwhp 402 torque 3000lb. Car (in reply to Blownsvt) Post #: 14

RE: make sticky? 03/04 cobra mods and dyno #s - 9/8/2006 12:52:27 AM    zincsvtcobra Posts: 207 Joined: 8/4/2006 Status: offline James let me know how the new IRS stuff works out at the track and what RPM you launch from. _____________________________ 2003 SVT Cobra Convert K&N FIPK Borla Stinger Catback LFP 2.8" Pulley SCT Xcal2 tune (Dallas Mustang) H&R Sport Springs UPR Short Throw (in reply to JamesTronix) Post #: 15

RE: make sticky? 03/04 cobra mods and dyno #s - 9/8/2006 9:30:21 AM    4Stangs Posts: 1452 Joined: 6/15/2006 Status: offline quote: ORIGINAL: JamesTronix Mods in my sig. Going to the track tomorrow night! Car is about 14-15 psi. http://s84.photobucket.com/albums/k4/jamie660/ Post the numbers! (in reply to JamesTronix) Post #: 16

RE: make sticky? 03/04 cobra mods and dyno #s - 9/8/2006 10:02:25 PM    03COBRA/C5KILLER Posts: 14 Joined: 8/29/2006 Status: offline 03 Cobra, Mineral Grey besides the mods listed in my sig I also have a Billet Flow 2.76" pulley w/ 4 idlers, but I have to leave the stock pulley on and put the stock H pipe back on so the dealership can fix my clutch TB (just started squelling like a rat in a blender) no dyno numbers yet < Message edited by 03COBRA/C5KILLER -- 9/8/2006 10:03:51 PM > _____________________________ 03 COBRA Dark Shadow Grey -MM Coilover susp. -MAIER Subframe connectors -JLT CAI -BBK O/R x-pipe w/ Flows -2.76 BF pulley w/ 100mm idlers -Predator tune (in reply to 4Stangs) Post #: 17

RE: make sticky? 03/04 cobra mods and dyno #s - 9/9/2006 12:09:13 AM    JamesTronix   Posts: 398 Joined: 7/10/2006 Status: offline Just got back from the track! Best run was 8.18. I cut a .552 light on it! It is a 8th mile track. No wheel hop issues at all. No spinning, just a little barking the tires. I launched at 2500rpms. < Message edited by JamesTronix -- 9/11/2006 5:41:48 PM > _____________________________ 03 Cobra-SOLD! Tuned by RWTD 500rwhp 486 torque New Ride: 03 Z06 Corvette Lunati 24/24 LSA 112 Cam Ported Heads Long tube Headers Breathless Ram Air U/D Pulley Tuned by Aaron Scott@South GA Corvette 442rwhp 402 torque 3000lb. Car (in reply to 4Stangs) Post #: 18

RE: make sticky? 03/04 cobra mods and dyno #s - 9/9/2006 12:10:31 AM    JamesTronix   Posts: 398 Joined: 7/10/2006 Status: offline Oh and I was running 15psi in the nittos. _____________________________ 03 Cobra-SOLD! Tuned by RWTD 500rwhp 486 torque New Ride: 03 Z06 Corvette Lunati 24/24 LSA 112 Cam Ported Heads Long tube Headers Breathless Ram Air U/D Pulley Tuned by Aaron Scott@South GA Corvette 442rwhp 402 torque 3000lb. Car (in reply to 03COBRA/C5KILLER) Post #: 19

RE: make sticky? 03/04 cobra mods and dyno #s - 9/11/2006 10:31:09 AM    4Stangs Posts: 1452 Joined: 6/15/2006 Status: offline Not bad. A little more practice and you'll be in the 7s easy. (in reply to JamesTronix) Post #: 20

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Ride of the Month
May 2008
1989 351W Hatch

Top 10 Posters
pro50sc 17409 nanaki 14581 dan04cobra 14388 88bluegt 14311 ride of the 13302 addermk2 13288 hotrods_n_bo 13193 2000gt4.6 12443 mustangman02 11601 1slo85 11497

New Vendors
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
4walls
BrandMotion
AMSOIL - Performance Oil Technology