make sticky? 03/04 cobra mods and dyno #s (Full Version)

Mustang Forums >> Ford Mustang Tech >> 4.6 (Modular) Mustang >> SVT Forums

make sticky? 03/04 cobra mods and dyno #s

  

freewilly -> make sticky? 03/04 cobra mods and dyno #s (8/31/2006 10:57:06 AM)

everyone with an 03/ 04 cobra post your mods, and dyno#s,and 1/4 times, and max boost,if you want a photo too. if you got one. maybe this will be a sticky who knows.i'll go first..i got a 03 cobra vert 27k miles, i got bassanai x pipe no cats,borla stinger exhast, stock manifolds still, accufab single blade with polished plemun,C/L inlet tube,a big air #2400 mass air,K/N FIPK filter,2.75 pulley and idler, 20 psi boost,steeda 03/04 sport springs,M/M full length frame connectors,tri axe shifter,and chip from JMS.hilton boost gauge overlay, my next mods are being done now. JMS porting eaton,and a 6lb lower crank pulley. my dyno date is for sept. 28th will show dyno#'s then. never run my car yet. happy posting.[:)] OK dyno #s are in 490rwhp at 5000 rpms and 576 tq at 3500 rpms . run a 12.85 at 114 mph with goodyear F1's spinnig and wheel hopping 1st and 2nd gear. drag nitto's r's too come next one got 1 pass cause of my vert.

  
CobraSnake -> RE: make sticky? 03/04 cobra mods and dyno #s (8/31/2006 11:20:51 AM)

I have an 04 cobra 13k miles on it. I have a magnaflow catted x pipe, magnaflow cat back, k&n drop in filter, and drag radials. Never been to the dyno yet. My 1/4 time is 12.951 @ 110. Oh and the 1/4 time was without the k&n drop in filter.

4Stangs -> RE: make sticky? 03/04 cobra mods and dyno #s (8/31/2006 1:45:55 PM)

2004 Cobra Mystichrome

-Pro Turbo System Turbo Kit Garrett T-76GTS
-SCT 2800 MAF
-SCT Xcalibrator 2
-Tuned & datalogged by 9# / 18# horsepower by Herman
-Kenne Bell Boost-A-Pump
-60# injectors
-MD Motorsports fuel line upgrade kit with fuel rails
-Mangaflow cat-back
-MAC off-road H pipe / Jet hot coated
-IRS Brace
-Full length subframe connectors
-DSS Level 5 Cobra halfshafts
-E-Boost 2 electronic boost controller
-Cobra R rear seat delete
-Precision fabrication polished intercooler reservoir

4Stangs -> RE: make sticky? 03/04 cobra mods and dyno #s (9/7/2006 2:43:01 PM)

This is a shameless bump. I'd like to see some more Terminators!

zincsvtcobra -> RE: make sticky? 03/04 cobra mods and dyno #s (9/7/2006 3:41:14 PM)

03 Cobra convert, K&N FIPK, Borla Stinger CB, American Supercharger 3" pulley, 13.0 @ 110.2 MPH on street tires and idle launch. Sorry, no dyno numbers yet and not the best pic.

[image]local://upfiles/45206/21AF9AC538A544AC86E4A5E498ABA973.jpg[/image]

zincsvtcobra -> RE: make sticky? 03/04 cobra mods and dyno #s (9/7/2006 3:44:45 PM)

How many pounds are you running 4stang? Nice dyno #'s!!!

4Stangs -> RE: make sticky? 03/04 cobra mods and dyno #s (9/7/2006 4:00:25 PM)

Well, i need to work on the tune, but that was a safe tune with pump gas at about 17 pounds. I'm working on some set-ups to run race fuel, nitrous and 20+psi. It'll take some brain work and dyno time, but i have some lofty goals for that car. I don't want a "dyno racer" if you know what i mean.[:D]

Thanks for the compliment.

Mt Twigbert -> RE: make sticky? 03/04 cobra mods and dyno #s (9/7/2006 6:24:18 PM)

Ohh great...

Just another FOTM 03/04 Cobra post..

Start a sticky just for 03/04s? Ummmmmm, retarded IMO...

4Stangs -> RE: make sticky? 03/04 cobra mods and dyno #s (9/7/2006 6:30:22 PM)

I like yellow on a mustang. looks good, zincsvt.

zincsvtcobra -> RE: make sticky? 03/04 cobra mods and dyno #s (9/7/2006 6:31:06 PM)

I figured you had a safe tune and could make way more than that. Easily 700 plus HP with race fuel.

spray175 -> RE: make sticky? 03/04 cobra mods and dyno #s (9/7/2006 7:18:15 PM)

2003 Sonic Blue Cobra- 8,200 Miles
2.76 Billetflow Pulley w/ Idlers
Accufab Throttle Body/Plenum
JLT Cold Air Intake
SLP Exhaust
LFP Heat Exchanger
LFP Intercooler Tank
NGK TR6's
Ford Racing FR500's w/ BFG's
Autometer Boost/Vac Gauge
Billetflow IRS Brace

Never had it dynoed and never ran it at the track yet.




[image]local://upfiles/24331/541916DA4D344E0284EFC95FD530C51F.jpg[/image]

zincsvtcobra -> RE: make sticky? 03/04 cobra mods and dyno #s (9/7/2006 10:36:20 PM)

Thanks 4stang. Those FR500's really look at home on your ride Spray. Nice job!

Blownsvt -> RE: make sticky? 03/04 cobra mods and dyno #s (9/7/2006 11:27:52 PM)

2003 10th anniversay cobra, 2.76 billet flow blower pulley, 3 100mm idlers 1 92 mm idler, jlt cold air intake, magnaflow catback exhaust, tune. I ahve a prochamber and a fluidyne heat exchanger waiting to go on yet too. but with the other mods i dynoed at 443.4 rwhp and 460rwtq. should be at the trakc this weekend for the first time so i'll let you know but i am still running my street tires so traction will be an issue lol.

JamesTronix -> RE: make sticky? 03/04 cobra mods and dyno #s (9/7/2006 11:37:23 PM)

Mods in my sig. Going to the track tomorrow night! Car is about 14-15 psi.



http://s84.photobucket.com/albums/k4/jamie660/

zincsvtcobra -> RE: make sticky? 03/04 cobra mods and dyno #s (9/8/2006 12:52:27 AM)

James let me know how the new IRS stuff works out at the track and what RPM you launch from.

4Stangs -> RE: make sticky? 03/04 cobra mods and dyno #s (9/8/2006 9:30:21 AM)


quote:

ORIGINAL: JamesTronix

Mods in my sig. Going to the track tomorrow night! Car is about 14-15 psi.



http://s84.photobucket.com/albums/k4/jamie660/


Post the numbers!

03COBRA/C5KILLER -> RE: make sticky? 03/04 cobra mods and dyno #s (9/8/2006 10:02:25 PM)

03 Cobra, Mineral Grey besides the mods listed in my sig I also have a Billet Flow 2.76" pulley w/ 4 idlers, but I have to leave the stock pulley on and put the stock H pipe back on so the dealership can fix my clutch TB (just started squelling like a rat in a blender[:@]) no dyno numbers yet

JamesTronix -> RE: make sticky? 03/04 cobra mods and dyno #s (9/9/2006 12:09:13 AM)

Just got back from the track! Best run was 8.18. I cut a .552 light on it! It is a 8th mile track. No wheel hop issues at all. No spinning, just a little barking the tires. I launched at 2500rpms.

JamesTronix -> RE: make sticky? 03/04 cobra mods and dyno #s (9/9/2006 12:10:31 AM)

Oh and I was running 15psi in the nittos.

4Stangs -> RE: make sticky? 03/04 cobra mods and dyno #s (9/11/2006 10:31:09 AM)

Not bad. A little more practice and you'll be in the 7s easy.[sm=smiley20.gif]

  

Page: [1] 2   next >   >>

Return to Mustang Forums home page or view the Full Version of this page.