Just got my 289 back from the builder, Edelbrock heads 60cc heads #60229, Comp Cam XE262H-10, Roller Rockers, Edelbrock Performer RPM intake, Flat top pistons with 9.3 compression. I'm leaning towards a 650..
Yup, that's what I was thinking.. According to Edelbrock, this combo should work with a 600 - 750 CFM carb. I know my cam is a little more aggressive then what they listed but, I figured the 650 would be the one to go with.
I was not 100% sure so I wanted to get some feedback from the forum prior to spending $325.. Looks like I have a relatively new Edelbrock 500 for sale...
I might use the AFB style Edelbrocks on my 2x4 302 intake, but most likely I will just fond some old AFB carbs rebuild them and use them instead. I like Holley much better than Edelbrock carbs. Never had good luck with the E carb at all... but that is just me. I am picky.
I have always had good luck with Edelbrock and not so good luck with Holley.. Well, it goes on ebay in the next 24 to 48 hrs, here's the carb listing in the for sale section. http://www.mustangforums.com/m_18793...tm.htm#1879304