If you don't mind using an exacto blade, then we've got the answer for all of you 87-98 owners looking to add tail light tint to your Mustang!
We are proud to introduce our cut-to-fit 12"x12" and 24"x12" vinyl tint sheets from 3M!
The cost is less than $37 to do a complete set of 96-98 tail lights!
Installation is rather simple and it goes like this:
Simply measure the area you want to tint, cut out enough material to cover the lens while leaving 1" excess around all edges. Then, apply the tint to the lens as you normally would by using the supplied squeege. Finally, trim off the excess around the edges with an exacto knife. That is pretty much it. Most first time installations take about 30 minutes.
We sell two different size sheets. A 12"x12" and a 24"x12". The sheets are available in black out or smoke and you can use it to tint virtually any lens or light on any automobile.
We specifically introduced this product though for the 96-98 owners who wanted to have tinted tail lights.
The products can be purchased directly off our site:
http://www.stangmods.com/3M_vinyl_ta...heet_s/125.htm
Any questions, please feel free to post up, email us or give us a call.
Matt
StangMods
240 876 9705
email:
sales@stangmods.com
Tail Light Tint for your 96-98 Mustang
