raiderguy34

how do you remove the shifter nob on a 2000 saleen mustang.

Birdieman4

Unscrew the cap at the base, and loosen the allen bolts. It should slide right off.
_____________
02 S281E

__________________
02 S281E #60 R.I.P.
01 S281 #582 Procharged
07 S281E sometime right before hell freezes over
http://www.ihra.com/profile/topfuel/rick_cooper.html
http://ihra.com/statistics/points/2006/TF.htm

S-28100

Are u getting a new one or different on or new shifter??

__________________
2000 saleen s-281 speedster
Saleen series IV twin screw
Mach 2 hood
Stailess steel bumper inserts
336rwhp 343rwtq stock

Birdieman4

...I'm was considering a Steeda tri-ax, but I'm really not unhappy enough to switch at this point.
_____________
02 S281E

__________________
02 S281E #60 R.I.P.
01 S281 #582 Procharged
07 S281E sometime right before hell freezes over
http://www.ihra.com/profile/topfuel/rick_cooper.html
http://ihra.com/statistics/points/2006/TF.htm

Blkstg2x

I've used a Pro 5.0, and a Roush/Steeda Shifter, and the Triax is the way to go!. It has to be the most accurate solid shifter on the market today. If you get a really good deal on the Roush shifter, it's the exact same as the Steeda Tri=ax, but it isn't embossed with the Steeda logo, of course. I know of way more people who use these 2 shifter vs anything out there. Just my .02

__________________
Tony
-MagnaFlow Tru-X Pipe w/cats
-Steeda Tri-Ax Short Throw Shifter
-JRC Handle
-SS Inserts
-Polished Roush Door Sill Plates
-Roush 3.73's (to be installed)