HELP!!! I just installed the front and rear Eibach sway bars. They pop anytime I make a turn or go over a bump. Any suggestions as to how to remedy this problem? I tried finding additional troubleshooting information through Eibach, but didn't have any luck. Unfortunetly, I don't speak German.

ORIGINAL: LocoStang06

HELP!!! I just installed the front and rear Eibach sway bars. They pop anytime I make a turn or go over a bump. Any suggestions as to how to remedy this problem? I tried finding additional troubleshooting information through Eibach, but didn't have any luck. Unfortunetly, I don't speak German.


LOL I don't know why you need to speak German. Eibach is an American company located in Corona, CA. LOL Anyway, there's not a lot of things that can go wrong with this kind of install. So we need a little more info. Did you do the install yourself? Is the popping sound coming from the front of rear of the car? Did you do any other mods at the same time like springs and or exhaust? Have you gone out an made sure that you retightened every bolt you took off or loosened?

if you didnt use locktight on the bolts you removed , when re-installing.. chances are the nuts backed off.. because every nut and / bolt is suppost to be a 1 time use only.. every time you remove your suppost to replace with brand new