MIG WELDER??

Printable Version

Mustang Forums >> Ford Mustang Tech >> Classic Mustangs >> MIG WELDER??

Page: [1]

Login Message << Older Topic   Newer Topic >>

MIG WELDER?? - 7/29/2006 7:27:28 PM    zack   Posts: 46 Joined: 7/19/2006 Status: offline just got mig welder from home depot k-2188-1 for 240$$ will this do the job for floors in my car if not i will return this if yes i go to work tomorow thanks zack Post #: 1

RE: MIG WELDER?? - 7/29/2006 7:28:21 PM    zack   Posts: 46 Joined: 7/19/2006 Status: offline and its lincon (in reply to zack) Post #: 2

RE: MIG WELDER?? - 7/29/2006 7:54:20 PM    Soaring Posts: 17565 Joined: 10/29/2004 Status: offline When I was a teenager, my old man was a cotton farmer, and when in the Spring he said "go to plantin'" I dropped the planter behind the John Deere and went to planting the cotton seeds. So, if the conditions are right for you, then " got to plantin." That welder will serve your purposes very well, so "go to plantin." < Message edited by Soaring -- 7/29/2006 7:57:31 PM > (in reply to zack) Post #: 3

RE: MIG WELDER?? - 7/29/2006 10:09:21 PM    zack   Posts: 46 Joined: 7/19/2006 Status: offline man i just did and i like welder just burn some holes need to practice some more (burn hole 2 high or feed to fast??) i don want my weld look like bird @#$% lol but i am getting better pray for me (in reply to Soaring) Post #: 4

RE: MIG WELDER?? - 7/29/2006 10:59:20 PM    atomsk680 Posts: 3795 Joined: 12/21/2005 Status: offline i just got my welder yesturday, i havnt had a chance to play yet becuase of work, i actually wont be able to till monday night. i got my floorpans today though, better condition then expected too. mustangs plus rocks. _____________________________ FOR SALE: 1969 Mustang coupe 5.8L Cleveland (in reply to zack) Post #: 5

RE: MIG WELDER?? - 7/29/2006 11:10:07 PM    shr   Posts: 506 Joined: 6/4/2006 Status: offline i weld in floor pans with a lincoln mig (110v) i use it on heat setting "b" with wire speed around 6 and get great penatration and a very nice weld (in reply to atomsk680) Post #: 6

RE: MIG WELDER?? - 7/30/2006 5:30:35 PM    RES   Posts: 65 Joined: 7/10/2006 Status: offline If you're burning holes then your heat is up to high. If you feel it kind of backing itself into your hand then you have wire speed up to high. If it archs goes away archs goes and you feel your hand drifting towards the weld turn wire speed up. If the same thing happens, but instead of your hand drifting the wire feed begins to stick then turn the heat up. (in reply to zack) Post #: 7

RE: MIG WELDER?? - 7/30/2006 6:31:07 PM    zack   Posts: 46 Joined: 7/19/2006 Status: offline res just try weld 5 minits ago and its just like u said thanks its going to be long night lol( no beer) (in reply to RES) Post #: 8

RE: MIG WELDER?? - 7/30/2006 6:34:03 PM    RES   Posts: 65 Joined: 7/10/2006 Status: offline quote: ORIGINAL: zack res just try weld 5 minits ago and its just like u said thanks its going to be long night lol( no beer) Definatly don't mix beer in with your projects. I've done that to many times and had to tear it all apart the next day, becasue what looks good after a couple of beers, uh not so much in the morning. (in reply to zack) Post #: 9

RE: MIG WELDER?? - 7/30/2006 8:04:29 PM    zack   Posts: 46 Joined: 7/19/2006 Status: offline beauty is in the eye beer holder (in reply to RES) Post #: 10

RE: MIG WELDER?? - 7/30/2006 8:05:18 PM    zack   Posts: 46 Joined: 7/19/2006 Status: offline of the beer holder (in reply to zack) Post #: 11

RE: MIG WELDER?? - 7/30/2006 8:06:53 PM    RES   Posts: 65 Joined: 7/10/2006 Status: offline I hear that. So how goes the progress? (in reply to zack) Post #: 12

RE: MIG WELDER?? - 7/30/2006 8:50:37 PM    zack   Posts: 46 Joined: 7/19/2006 Status: offline well.... hmmmmm i am on my 5 th beer, so far so good just cuting my floors right now but next day going to do some more welding.i almost quit today but my women said "get car out our driveway"!!! damn women no good!!i like work on my coupe its just 2 damn hot in new orleans right now,and i am trying to do right job on the floors i take some pic latter (in reply to RES) Post #: 13

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Top 10 Posters
pro50sc 17932 nanaki 14694 88bluegt 14536 dan04cobra 14535 addermk2 14016 ride of the 13720 hotrods_n_bo 13332 2000gt4.6 12516 mustangman02 11995 1slo85 11780

New Vendors
Extreme Dimension
BMR Fabrication
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
BrandMotion