3rd Brake Light Decal

Printable Version

Mustang Forum >> Vendors & Sponsors >> AutoBadges.com >> 3rd Brake Light Decal

Page: [1]

Login Message << Older Topic   Newer Topic >>

3rd Brake Light Decal - 7/24/2006 7:50:35 PM    BlacKListeD   Posts: 49 Joined: 4/5/2006 Status: offline I just ordered it from autobades.com and i went to put it on and befor i took of the paper backing to put it on i noticed that it was larger than the brake light vertically and shorter horizontally. Did I buy the wrong one I have a 04 and i bought the 99-04 decal. Post #: 1

RE: 3rd Brake Light Decal - 7/25/2006 1:25:08 PM    Autobadges.com Posts: 5579 Joined: 8/3/2005 From: Los Angeles, CA (SoCal) Status: offline The 3rd brakelight covers the LIT part of the 3rd brakelight (stated on the description on site) so the horizontal is explained there. The vertical....it tends to shrink a bit with the sun...line it up with the bottom and you should be set _____________________________ ***V6MustangMeet*** July 19, 2008 (in reply to BlacKListeD) Post #: 2

RE: 3rd Brake Light Decal - 7/25/2006 11:53:23 PM    BlacKListeD   Posts: 49 Joined: 4/5/2006 Status: offline it hangs over the top by about a half an inch. (in reply to Autobadges.com) Post #: 3

RE: 3rd Brake Light Decal - 7/26/2006 3:29:08 PM    Autobadges.com Posts: 5579 Joined: 8/3/2005 From: Los Angeles, CA (SoCal) Status: offline Do you have a stock 99-04 wing? If you do, line it up and take a picture and send it to me so I can determine what is wrong. Worst case scenario you send it back and we send another OR you just get an exacto knife and shorten it to save like 2 weeks time _____________________________ ***V6MustangMeet*** July 19, 2008 (in reply to BlacKListeD) Post #: 4

RE: 3rd Brake Light Decal - 7/26/2006 11:35:52 PM    BlacKListeD   Posts: 49 Joined: 4/5/2006 Status: offline the wing is stockbut the 3rd brake light isnt on the wing. ill take pic tomorrow. (in reply to Autobadges.com) Post #: 5

RE: 3rd Brake Light Decal - 7/28/2006 12:19:21 AM    Autobadges.com Posts: 5579 Joined: 8/3/2005 From: Los Angeles, CA (SoCal) Status: offline hmmm ok yeah take a pic please.....if its off why not just wrap it or cut it accordingly then install? _____________________________ ***V6MustangMeet*** July 19, 2008 (in reply to BlacKListeD) Post #: 6

RE: 3rd Brake Light Decal - 7/31/2006 11:40:08 PM    BlacKListeD   Posts: 49 Joined: 4/5/2006 Status: offline are you going to give me a new one if this one get messed up after i cut it? (in reply to Autobadges.com) Post #: 7

RE: 3rd Brake Light Decal - 7/31/2006 11:54:01 PM    Autobadges.com Posts: 5579 Joined: 8/3/2005 From: Los Angeles, CA (SoCal) Status: offline Actually I was talking to all my other customers that I send them too and they are all the same and they just move a slight bit of the tint over the top of the light and you cant even tell unless you get really close and they love how it looks....so I would say install AS IS bc thats how they ALL are. BUT if you cut it...it won't mess up...only way it will mess up is if YOU mess it up _____________________________ ***V6MustangMeet*** July 19, 2008 (in reply to BlacKListeD) Post #: 8

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Top 10 Posters
pro50sc 17921 nanaki 14685 88bluegt 14536 dan04cobra 14526 addermk2 13993 ride of the 13711 hotrods_n_bo 13326 2000gt4.6 12516 mustangman02 11983 1slo85 11744

New Vendors
Extreme Dimension
BMR Fabrication
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
BrandMotion