00limited7

I have a question on rear seat belt buckles. Do the rear seat belt buckles criss cross over the hump before they come through the lower seat ? I was wondering if someone took them off and put them back on wrong? The seat was loose and the buckles were under the seat so I tried to get the belts to pull through the holes but it didn’t seem like the belts where long enough. If someone could give me some insight on this I would really appreciate it. I've got to give my son a ride home today and there will be two friends with him so they are going to need some belts.

Thanks again!

Roger

__________________

87 LX T-Top 5.0,5-speed,3.73,Cobra intake,GT-40P heads,cam,BBK 70mmTB,BBK CAI, FRPP Headers,Bassani X-pipe, Flowmasters American Thunder.

Boss_Hotrod

They shouldnt cross the tranny tunnel. They should come striaght up and the buttons should face the center of the car.

5.0 MPG

no criss crossing!

__________________

00limited7

Thats what I thought! Some one must have put them in wrong. Here is a pic I just took.

Thanks guys

[IMG]local://upfiles/21276/CEF85CFC559E4483B0A0716556ED86AD.jpg[/IMG]

__________________

87 LX T-Top 5.0,5-speed,3.73,Cobra intake,GT-40P heads,cam,BBK 70mmTB,BBK CAI, FRPP Headers,Bassani X-pipe, Flowmasters American Thunder.

HACKGT350

all you gotta do is pull them up and they should only go so far so they really wouldnt be long enough to criscross and come up to be buckled

__________________

5.0 MPG

on my 91 those belts are bolted with the inner bolts on the seat bracket? where are your brackets?

__________________

00limited7

I'll go out and look after work. Damn slave driver won't let me walk out and take a look.

Bosses are bishes...

__________________

87 LX T-Top 5.0,5-speed,3.73,Cobra intake,GT-40P heads,cam,BBK 70mmTB,BBK CAI, FRPP Headers,Bassani X-pipe, Flowmasters American Thunder.