Know anything about whether theyre making a stroker kit for the GT's Rygen?
No, the closest I have seen to one is a Fin1's built motor. He's a member here, he has a built GT motor with the PH Turbo. He runs 11's with it, but the car traps at like 125+, so I'm guessing with practice, he will hit low 11's.
But I did find this....looks like what you were looking for...
Know anything about whether theyre making a stroker kit for the GT's Rygen?
No, the closest I have seen to one is a Fin1's built motor. He's a member here, he has a built GT motor with the PH Turbo. He runs 11's with it, but the car traps at like 125+, so I'm guessing with practice, he will hit low 11's.
But I did find this....looks like what you were looking for...
Know anything about whether theyre making a stroker kit for the GT's Rygen?
No, the closest I have seen to one is a Fin1's built motor. He's a member here, he has a built GT motor with the PH Turbo. He runs 11's with it, but the car traps at like 125+, so I'm guessing with practice, he will hit low 11's.
But I did find this....looks like what you were looking for...
Know anything about whether theyre making a stroker kit for the GT's Rygen?
No, the closest I have seen to one is a Fin1's built motor. He's a member here, he has a built GT motor with the PH Turbo. He runs 11's with it, but the car traps at like 125+, so I'm guessing with practice, he will hit low 11's.
But I did find this....looks like what you were looking for...
wait! no F/I and stroker combo? Are you sure? I need second opinions!
I believe it was only Supercharged not stroked... you can always check the article though, it was in Augusts MM&FF. I dont have the mag handy or I would do a quick check.
wait! no F/I and stroker combo? Are you sure? I need second opinions!
stroke and force induction screams badnews.. you mightbe able to get away with 6psi,orsomething diddly like that.. if not your be splitting pistons in half, inline with the wrist pin.. thrust angle will become too great
_____________________________
05 V6 black,std, red int alpine CD9835 10" rockford P2 directedaudio x2600 amp xenon rear window scoops eibach pro-kit Dual GT take offs
Strokers are nice, but they are just way too expensive. I just don't see it feasible. I mean if we wanted that much power then we wouldn't have went with the GT, right? If it is going to be a race car then I say go for it, but not as an everyday driver.
hey blackfoot, arnt you going to be selling turbo kits? If so, how much do you think you will sell them for? If you can beet powerhouse's price you may have yourself a customer!
_____________________________
2005 4.0 auto Mods: mrt duals, x-pipe, 28" glasspacks; mmr cai w/ inlet tube; 3:73's; x-caliber; royal purple oil, gear oil, coolant additive. Looks: cdc billet grill and louvers
all those plans wont start untill next summer, i got one semester of school left for my level 3 apprenticeship, and im living on a tight budget utill then.. after all that, ill be doing all the blueprinting.. i got all my intercooler piping, and intercooler
i still need to make manifolds , and get the turbo
_____________________________
05 V6 black,std, red int alpine CD9835 10" rockford P2 directedaudio x2600 amp xenon rear window scoops eibach pro-kit Dual GT take offs
Printable Version
RE: 4.5L Stroker Kit comming..... - 
Thank you!
